Looking for Thailand leadership corporate training to raise you or your teams skill levels ? Speaking of facilitating training logistics, note that you can reduce your training costs through blended learning. Simply put, fewer trainers for less time, means less expenses for travel, transportation, accommodation, and meals. Of course, neither online training is free of charge; it requires multiple resources and high skill professionals to design and develop high quality online training deliverables. However, you can keep its cost at low levels by taking advantage of the free educational technologies that are available today. All in all, blending different delivering modes in your corporate training can significantly increase your training’s ROI, as reducing traditional training costs can be effectively combined with improved staff performance.
You will find that one important aspect of corporate training involves project management. If you want to improve how your business handles projects of all sizes, this training can certainly be of great assistance. The efficiency with which you complete your projects will have a huge effect on how easily you are able to grow your business, so you will need to learn all you can. Most businesses don’t realise just how much they could improve the way they handle projects. This training will provide your employees with the necessary knowledge and tools they need to help your business become even more successful. See more details on Communication corporate training in Bangkok.
Motivation through Gamification: Gamification motivates people to perform better. Introducing gaming elements such as a leader board or scoreboard creates a competitive environment, encouraging participants to perform and score well. Awarding points for each achievement and providing badges as rewards inspires the trainees to enhance their performance in the next task. Improves Problem Solving Skills: Simulation and virtual training environments are risk-free and hence participants are free to test their skills in an online environment. There’s no harm even if they commit a mistake. Participants can implement their knowledge in virtual scenarios and get real-time feedback. This will help them avoid mistakes in a real-world scenario. This exercise helps in developing problem-solving and critical thinking skills.
Don’t try to be everything to everyone. Focus. Relentlessly grow as a professional. Have a vision for yourself and pursue diligently. Though progress requires action, sometimes we can be too quick to act. Sometimes a momentary pause is all we need to see a challenge from a different perspective, therefore resulting in a different and more effective approach. Thinking and acting are not mutually exclusive. Switching perspective from “me” to “you” switches everything. The saying “people don’t care who you are until they know what you can do from them” is absolutely true! Anyone wanting to influence anyone else must first know what is already influencing them. You do that by asking enough questions to truly understand what they need, and then packaging what you want in a way that meets their needs first. Read extra details on https://www.mindtools.co.th/personal-development/neuro-linguistic-programming/nlp-meta-programs/.
Contrary to what some trainers or learning and development departments might say, the return on investment in training is directly measurable. The key is to select the proper variable to measure. It might be difficult to isolate the effects of training on your bottom line, but every business has baseline numbers that will react to a training program. Here are some of the numbers seen by companies when they implement a corporate training program in various areas of their business: Leadership: Company wide profit margins increased by 47%, Company value improved by 86%. However, not all corporate training programs are created equal. Process training is basic, and every company should have this in place. This is just making sure everyone knows how to use all the tools your company utilizes, and it’s a great place to start.
Increases learner engagement. What is learner engagement? Learner engagement is a measure that reflects the quantity and quality of a learner’s participation in their courses and every other aspect of their educational program. In today’s world of limited attention span and increasing distractions, the corporate L&D is facing the challenge of creating and sustaining the learner engagement . The traditional classroom training has failed big time as it disengages and makes the learning experience too boring.. With the millennials loving games, e-learning gamification is an ideal strategy to bring back the engagement in learning. How the use of gamification in workplace training can enhance learner engagement? Using the right game mechanics and game elements. Use of rewards in e-learning gamification. Creating competition. Make it social. Source: https://www.mindtools.co.th/.
Top free no deposit bonuses at the biggest online casinos? Gambling industry is very big in 2019 and there are lots of choices for any person that wants to have some fun gambling online. My recommendation is to educate yourself about online casinos choices before starting. Some casinos are simply better than others so pick one before reading some gambling reviews.
Is My Money Safe In A Casino Online? Real money online casinos are protected by highly advanced security features to ensure that the financial and personal data of their players is kept safely protected. The legitimate sites that we list as the best also have a solid reputation for ensuring their customer data is truly safe, keeping up with data protection and privacy legislation. The real cash slot machines and gaming tables are also audited by an external regulated security company to ensure their integrity.
The key to playing online for real money is not only to choose an online Casino that lets you do that and that offers you great games – but to pick one that accepts the payment methods you use. Whether you are going to use your credit card, Western Union or you look for PayPal Casinos to transfer money from your e-wallet to your Casino account, knowing about payment methods is key. Bank options are important not only for the deposited funds to become available (quickly) for your games but also to make sure you can have a fast payout whenever you win something! During our review process, we test as many payment options as possible and give high ratings to the Casinos with the fastest payouts. The possibility to withdraw money quickly from a Casino software is not always the first aspect that people consider when they choose a Casino online, but we know that you are going to love the opportunity to do so after your first sizeable win. That’s why all our favourite Casino sites offer a large number of payment methods and the fastest payouts in the industry. See more info at SuperNova Casino.
Rizk Casino hit the market in 2016 and has already established itself as one of the highest quality gaming sites on the web. The casino forms part of the Gaming Innovation group and is the sister casino of top ranked GUTS.com. Rizk is all about real rewards and no nonsense. The site comes with a user-friendly design and Captain Rizk welcomes all players with a smile and a knockout welcome bonus. Players who prefer simple, responsive entertainment and honesty will immediately feel at home at Rizk casino. The casino comes with a large variety of over 900 top class games and spectacular bonuses. There really is something for everyone, from traditional card and table games, video poker machines to mobile scratch cards, live casino games and even an impressive selection of 3D slots. Did we mention that they also have an extensive sports betting platform? Their 100% honesty policy makes players feel at easy and provide them with a safe and secure online experience. Captain Rizk will be there from day 1, guiding you through an epic adventure of non-stop entertainment.
Browsing our list will not only help you find an experience to enjoy, you’ll be rewarded with one of our generous promotions. we partners with the best new casinos to offer the most generous and exclusive sign-up bonuses available in the United States. Players browsing our top list will notice each review comes with a signup bonus offering free cash and/or free spins. Each offer is a little different thanks to the terms and conditions but all of them are generous and sure to get you started off on the right foot once you’ve selected a new casino to join. If none of the casinos listed suit your fancy, we provided some tips in the next section for choosing a casino not selected as a top option by one of our expert reviewers.
How to increase your Youtube channel subscriber numbers, this is a hot issue amongst Youtube content providers. Based on your video plan begin to writing your video script. Try to keep the language relatable and appealing to your audience. If your video is a beginners guide don’t use too many technical terms. If you are making an in-depth YouTube video make sure to include terms that are specific to the industry to build trust with your viewers. Don’t create a long script if your storyboard is short as it will mean a lot of lingering on screens that will not make for a good viewing experience. And don’t forget about email marketing. With an industry average open rate of 18 percent and a purchase rate of 66 percent, email marketing is a powerhouse when it comes to sales conversions. It doesn’t need to be too complicated either.
Make your title short and interesting. Your video title should not necessarily describe your video in a way that makes sense to your administration. Make your title viewer-centric, and think about what would make you want to click on a video. (Upworthy headlines are a good source of inspiration.) And try to keep it brief – a shorter title that doesn’t get cut off is better for click-throughs. However the the fastest method is to buy subscribers from a marketing agency, that can promote your videos to a larger audience.
Be Present Within Your Niche Community: Promoting yourself as an expert in your own videos is one thing, but being an active member in your niche community is another. Comment on other videos and offer your advice or feedback, and if there’s video content that is missing some vital information, link others to your content to provide them with more information. Try to be as helpful as possible and you’ll be rewarded with more users to increase your subscribers and ultimately, your video views. YouTube has the unique ability to be present on a variety of different social media platforms. It can be embedded and shared, sometimes virally, with just a few clicks. Here are some ways to get more YouTube views outside of the platform.
YouTube already has this default system where it automatically chooses 3 images which are apt as a thumbnail for your video. But then you can also create your own thumbnail and upload it. Facebook is the world’s largest social media platform. You must connect your Facebook account with your YouTube channel in order to have further engagement and discussion on your video. Facebook is also useful for reaching out to your subscribers when they are not active on YouTube. You can post the video as an embedded video to generate more views. Twitter is a platform where you can keep the conversations moving related to your area of concern. Since Twitter heavily works on the hashtag, you can research on a hashtag which is popular and make a video related to that. Whatever Tweets that you are putting on Twitter must contain relevant hashtags so that the audience is driven towards it.
“People come to expect your content. You create a dependable rhythm like your favorite TV show. You know it comes on every week. Plus, when you create more content you increase the number of places people find you online. Instead of seeing your brand for one or two YouTube searches, you start to appear again and again in search results.” A simple formula that works is this: 1×4. Publish four YouTube videos every month. That breaks down to one video every week. It’s an easy number to remember and you’ll soon see new YouTube subscribers trickling in. Your Task: Commit to a publishing schedule. An easy formula: one YouTube video every week for a total of four a month. Expand your reach with Facebook, Instagram, and Twitter. YouTube is a fantastic way to attract free subscribers. And often what works on YouTube can also work on Facebook, Instagram, and Twitter video. Expand your reach by publishing your YouTube videos on different social networks. With Hootsuite, you can do this pretty quickly. Use Hootsuite to upload and schedule your YouTube videos—and then publish that same video to other video networks such as Facebook, Instagram, and Twitter. It’s also easy to use our video integrations—such as the amazing tool Vidyard—to access detailed video and conversion data. Source: https://subsshop.com/.
Panama adventure travel locations are a hot thing to do right now. Few locations include Pearl Islands, Indigenous peoples populated the Pearl Islands until Spanish Conquistadors discovered the archipelagos’ wealth of pearls in the 1500s. The islands gained new popularity after being featured on the reality television show Survivor. The islands feature lush forests surrounded by white sandy beaches. Contadora Island is the most developed of the Pearl Islands, with several resorts and an airstrip. Visitors can charter private yachts to cruise and explore the islands.
One of the very few places in Panama where you can watch the sun set over the Pacific Ocean, the Sunset Coast is an undiscovered area with small towns, wide open beaches, and a small number of lodges where you can get away from the tourist scene. This is rural Panama, home to rolling hills, small villages, family farms, and huge beaches lined by palms and forest. Foreign tourists are not plentiful the way they are in other areas of the country, and many of the visitors are Panamanian. The road down to the Sunset Coast from the Pan-American Highway is twisty and has a few potholes to dodge, but every mile takes you further off the beaten track. This area is also popular with surfers. The wide-open beaches take the brunt of the Pacific Ocean rollers, and it’s rare that you’ll need to share a wave. If you want a beach all to yourself, this is the place to come.
The Pacific Coast of Mexico has been a great place for sport fishing and certainly in San Blas you can live a great adventure and find a variety of fish such as Dorado, Sailfish and Marlin, as well as Mojarra, Pargo, Sierra and Snook, depending on the season. Be sure to visit the famous International Tournament Sailfish, Marlin and Dorado which is held every year during the months of May and June.
Our last stop, an island famous among sailors who know the best kept secrets in San Blas, gives you more time to swim in the beautiful calm waters. With two islands right next to each other and home to a big shipwreck, stranded on its outer reef, you can enjoy the pristine beaches and beautiful scenery. Between 3-4pm we will leave this island paradise and head back to the Port of Carti. Your driver will be waiting for you and safely drive you back to Panama City, dropping you off at your lodging by 7pm. San Blas is one of the last unspoiled and undeveloped places in the world and we hope you will get to experience the beauty of the islands and the innocence of the unique Kuna culture. For our guests who only have one day to travel to the “Guna Yala” nation, the San Blas Day tour is the best option and will surely make you want to come back again. Extra info on San Blas tours.
To get to San Blas you’ve got four options. You can fly from Panama straight into the San Blas Islands, take a sailing boat from Cartagena, take a speedboat from Capurganá, or take the bus from Panama City. Most backpackers travelling between Colombia and Panama choose one of these options. For a good reason: Travelling over the land border, known as the ‘Darien Gap’, can be very dangerous . This is a popular drug trafficking route out of Colombia to Panama and is not safe (plus it’s just untamed jungle the whole way!).
There’s not a great deal to do on the San Blas islands – in a way, that’s the point. Much of the time you’ll be swimming, snorkelling or reading on the beach. Normally there will be day-trip or two, to a nearby island that offers something different; that could be a shipwreck to explore, or an area full of starfish. Meals will usually be rice and fish. Once the generator cuts out in the evenings, it’s time to bed down. As the better tour operators will tell you, when you visit the San Blas islands you are doing so as a guest of the Kuna – and they are an indigenous group, not a tourist operation. So the jeep that picks you up from Panama City might be late, or might make unscheduled stops. The water taxi at the port might take a while to turn up. The toilets will be very basic. And so on. It’s certainly worth reading this list of what to expect before you go. Source: https://www.taotravel365.com/.
Complete guide to yoga training, this appears like a hot topic in 2019. Stress is high, life is complicated, big problems clouds our mind and yoga seems the best answer. What is Yoga? There are many different ideas related to Yoga, where it comes from, what it is all about, and how to practice a range of techniques. Generally, it is recognised as an ancient system of philosophies, principles and practices derived from the Vedic tradition of India and the Himalayas, more than 2500 years ago. It is a system that recognises the multi-dimensional nature of the human person, and primarily relates to the nature and workings of the mind, based on experiential practice and self-enquiry. In Yoga, the body, breath and mind are seen as a union of these multi-dimensional aspects of each and every human being. The system and various techniques of Yoga cultivate the experience of that union, leading to greater integration of being, internal peacefulness, and clarity of the mind. It is a system that is designed to cultivate health and happiness, and a greater sense of self-awareness and higher consciousness.
Each Sun Salutation round consists of two sets. These 12 yoga poses complete one set of Surya Namaskar. To complete the second half, you need to repeat the same sequence of postures, only moving the left leg instead of the right (in steps 4 and 9 given below). You might find several versions of doing Sun Salutation. However, it is best to stick to one particular sequence and practice it regularly for best results. More on Surya Namaskar or Sun Salutation.
The Crow yoga pose strengthens the wrists, forearms and abdomen while also stretching the hamstring. Balance is crucial for this pose. This mudra is used for mental clarity. You perform this gesture when you need to understand intuitive messages from your subconscious (i.e., dreams or meditations that puzzle you). One of the most powerful benefits of this mudra can be found in the improvement of communication, such as improving internal and external dialogue. Method: This mudra is performed by touching your thumb to your pinky finger, while holding your other three fingers straight.
Sukhasana (Easy Pose): You can sit in this position for any length of time, but if you practice this pose regularly, be sure to alternate the cross of the legs. A good rule of thumb: On even-numbered days, cross the right shin in front of the left, and on odd-numbered days, do the opposite. Alternately, you can divide the practice time in half, and spend the first half with your right leg forward, and the second half with the left leg forward. Sukhasana is a Sanskrit word where sukh means “pleasure” or “happiness”, and asana means “pose”. It creates a calm ambiance in your body and mind. This pose encourages groundedness and a humble atmosphere in your body. During this exercise, try to focus in between the eyebrows. Lift up your energy from the social desires of the world to walk a path towards enlightenment.
Types of Yoga: What are the four main types of yoga? Answer: karma, bhakti, jnana, and raja. Jivamukti was created in 1984 by Sharon Gannon and David Life in New York City. ivamukti translates to “liberated being.” Class incorporates Sanskrit chanting, Pranayama, and movement (Asanas), with a theme or lesson for each class. This is a good blend of spiritual and physical exercise.
If you are in stressful job, this is just the yoga practice for you. As the name suggests, restorative yoga postures are meant to relax and rejuvenate. Many of the classic yoga poses have been modified so that they are easier to do and are more relaxing. This practice helps you tap your parasympathetic nervous system so that you can truly relax your mind and body deeply. Like Iyengar yoga this style too takes the help of props like blankets, bolsters and yoga blocks to help you perfect each yoga pose without straining yourself too much. If you are struggling with insomnia, anxiety, stress-related illnesses, then you should definitely try restorative yoga.
When you contract and stretch muscles, move organs around, and come in and out of yoga postures, you increase the drainage of lymph (a viscous fluid rich in immune cells). This helps the lymphatic system fight infection, destroy cancerous cells, and dispose of the toxic waste products of cellular functioning. When you regularly get your heart rate into the aerobic range, you lower your risk of heart attack and can relieve depression. While not all yoga is aerobic, if you do it vigorously or take flow or Ashtanga classes, it can boost your heart rate into the aerobic range. But even yoga exercises that don’t get your heart rate up that high can improve cardiovascular conditioning. Studies have found that yoga practice lowers the resting heart rate, increases endurance, and can improve your maximum uptake of oxygen during exercise—all reflections of improved aerobic conditioning. One study found that subjects who were taught only pranayama could do more exercise with less oxygen.
How does it help build muscle? Most poses are held for five full breaths versus the usual one to three breaths. Muscles are challenged as the mind and body have to work together simultaneously to hold a position without giving up. Breathing, posing, moving, and increasing flexibility happen together at one time, which unearths a new level of discipline in your mind and body.
YTTI provides you Hatha and Ashtanga Yoga Teacher Training in India, which is focused on one’s inner improvement. We have Yoga Teachers who practiced yoga for many years and have in-depth knowledge about yoga. Our selection criteria about yoga teacher is so strict that we confirm our students who come for Yoga teacher training in India from different parts of the world get the best yoga education so that they can spread benefits of yoga further. See more info at www.yogateachertraining-india.com.
Searching for the best quality appliance repair in Brea? First let us offer a few tips to increase the life span of your appliances, to make them last longer. Whether you bought your home appliance at a local outlet or a big-box retailer, chances are you purchased it with the intent it would last a long time. But just as cars need the occasional oil change and tune up to extend their mileage, your home appliances need some added attention now and again too.
Even the smallest details can save you a great deal of money on your next energy bill. By allowing your leftovers time to cool down after a meal, you are reducing the amount of heat added to the interior of your appliance. You should also properly store your food in protective wrapping or Tupperware prior to placing your dish in the refrigerator as it prevents any residual heat from escaping into your unit. Just be careful, don’t let your food sit out cooling for too long, as it may spoil.
Reposition the refrigerator. Your fridge runs more efficiently when it has airflow behind it. Pull the fridge an inch or two away from the wall to improve how it runs. Clean the fridge. Wipe down the door gaskets and vacuum the condenser coil on your fridge once and a while to keep it running more efficiently. Organize the fridge. You can use clear plastic bins to help organize similar foods in your fridge. You can also line the shelves with plastic wrap to make the cleaning process very easy.
Having been an appliance manufacturer for a very long time, GE provides a wide range of appliances for homes and even for commercial purposes. They have continuously adapted to the modernizations that technology brings and GE remains to be one of the most popular brands inside American homes. For the kitchen, they have different models of refrigerators, freezers, dishwashers, disposers, and trash compactors. Trash compactors and disposers aren’t often part of other appliance manufacturers, but GE provides thorough kitchen appliance options that include these appliances as well. For cooking purposes, they have various ranges, wall ovens, their very own Advantium ovens, range hoods and vents for better kitchen environment, microwaves, cooktop units, and warming drawers. They also offer a variety of housewares or smaller appliances such as coffee makers, juicers, bread toasters, blenders, deep fryers, grills, waffle makers, hot pots and plates, roaster ovens, griddles and skillets, slow cookers, kettles, food processors, mixers, and toaster ovens. They also have their own irons for you to choose from.
If you are searching for appliance Repair in San Juan Capistrano please check Appliance Repair Orange. Appliance Repair in Orange County is a family owned and operated company offering our customers quality home appliance repair since 2005. We service and repair all major brands and models of residential appliances: refrigerators, freezers, ice makers, washers, dryers, ovens, ranges, cooktops, dishwashers and vent hoods. No matter what brand of appliance you own: Amana, Bosch, Frigidaire, General Electric/GE, Jenn–Air, Kenmore, KitchenAid, Maytag, Whirlpool or even high-end one as Sub-Zero & Wolf, Thermador or Viking, occasional breakdowns may occur at any time.
5 guidelines for moving to a new house with maximum safatey can reduce the cost of relocating. Here are a few tips from our favorite Denver moving company. Decluttering before you sell means that you only move what you really need – and you will not only save money by doing so, but you will also save time in the new house by not having to unpack and deal with all that stuff in the future.
A good starting point will be rooms and items you use the least. The spare bedroom, garage or attic are usually easy places to start. Leave everyday items until the day before the move and keep any essentials items such as medication separately. See more info on Affordable moving companies Denver.
Place an extra cotton pad or ball into your powder cosmetics to keep them from breaking. Make a detailed corresponding list of what’s in each box by number. This makes it easier to make sure you didn’t forget any boxes, or god forbid, someone stole one. AND, if there’s anything valuable in there, you won’t be broadcasting it to the world by writing it down right there on the box.
So you found a new place! It’s all wonderful and exciting until you start to think about how much crap you have. If you plan to pack and load your moving truck by yourself or with help from your friends you should defer to a larger truck size. Professional movers are trained to maximize the overall space, whereas those not professionally trained may not be able to achieve the same level of efficiency. If you are considered about space consumption consider hiring moving labor to properly load your truck. Moving trucks between 14′-17′ are the most common sizes rented. They tend to be the most inexpensive trucks because of the quantity available. Small rental trucks should be used primarily for local moves. Only consider renting a 10′-12′ truck if you have a studio or small one bedroom apartment with minimal furniture.
An important factor many people overlook is the distance of the move. If you are relocating to a new home in-town or just a short distance away, you may feel comfortable estimating your truck needs on the low end. After all, you can always make two trips if you run out of truck space. On the other hand, if you are making a long distance move, it is not practical to make multiple trips. Estimating on the higher end may be beneficial. If you get in a bind, you can always rent a trailer to tow behind your car for additional space.The steps that you take to prepare for moving day can make or break your overall moving experience. Apply these tips to estimate better the truck size that is suitable for your needs. A moving truck is a necessity when you are relocating. If you hire professional moving services, the moving company will likely bring their vehicle or trailer. However, other moving services will just load and unload a truck or moving container that you rent. There is also the option of loading the truck on your own with the help of family or friends. If you must reserve a moving vehicle for your upcoming relocation, selecting the right size is essential to a smooth and efficient move. See more info at Cheap moving company Highlands Ranch.
If the rental agency doesn’t provide an estimate of what the trucks can hold in terms of equivalent spaces as in the list above, you can guess using this general guide: one room = 3 cubic feet of truck space. Again, this is just an estimate, and you should always err on the side of caution and rent a slightly larger truck than your estimate.
Decluttering your home is a massive job in itself, and this is a job only you can do. As such, why not take the strain off a little and get the removals to do what they are best at – and that’s to pack everything up for you. For me, its a no-brainer for so many reasons: They will be insured for any breakages. They can do this SO quickly! (it’s great to watch the experts in action!). It usually doesn’t cost a lot (a lot less than I imagined it would cost), and when you are talking about the cost of moving I think it’s an expense that’s well worth it. It frees you up to oversee everything. They supply all boxes and packaging which will save you time and expense
Moving house costs. A lot. Why would you want to add to this cost by paying to move things you don’t use or need? We all have items in our house that have long been forgotten – usually ending up in the garage, loft or shed, but they could be lurking anywhere. Before you start your packing is the perfect time to go through everything and have a good sort out. Moving is a fresh start, so the last thing you want to take with you are things that you don’t need or use any longer. Decluttering before you sell means that you only move what you really need – and you will not only save money by doing so, but you will also save time in the new house by not having to unpack and deal with all that stuff in the future. I call that a win-win!
Leave a note in your old house to say you have set up mail forwarding, but give your new address and contact details just in case anything should be sent to the old house in error – that way you are covered from all angles. Source: https://strongmanmovingusa.com/.
Here are some tricks about welding supplies and how to make the best buying picks. MIG Welding Increases Welding Speed: In addition to welding aluminum and other softer metals, MIG-welding works faster, provides cleaner welds, and handles many different types of metals. The downside is its complexity. MIG Welders need direct currents, a steady stream of inert gas, and precise control of their torches. The amount of heat generated from MIG welding provides the deep penetration required for a strong weld, while also melting the feed wire rapidly enough to maintain a higher welding speed than other techniques. Given the inert gas required for MIG welding, keep in mind that this technique cannot be conducted in windy areas. The Right Stick Electrode Increases Welding Speed: There are three kinds of electrodes used for stick welding: fast-fill, fill-freeze, and fast-follow. While each electrode has its advantages, the fast-fill electrodes melt quickly and allow welders to work faster.
What factors should you consider when determining a budget? You may already have an estimated budget in mind. The type of welder you purchase should be suited for the specific functions you require as well as the projects you will work on the most. Think about your end goal and consider opportunities to expand the usefulness of your welder. Will you want more power or amperage in the future? It is important to take note of the varying amperage and power requirements as well as the duty cycle necessary to achieve the most effective and economical operational results for the projects you’re looking to complete. In addition to the cost of the welder itself, don’t forget to include costs for the accessories and supplies you’ll need to operate your new welder. This includes welding protection (helmet, gloves, jacket, etc.) as well as gas and consumables.
Delivery of parts to the welding station in an organized and logical fashion is also a way to reduce welding costs. For example, one company was manufacturing concrete mixing drums. In the fabrication process, the company produced 10 parts for one section, then went on to make 10 parts of another drum section, etc. As pieces came off the line, they were put onto the floor of the shop. When it was time to weld, the operator had to hunt for the pieces needed and sort through them. When the outside welding expert pointed out the amount of time being wasted in this process, the company started to batch each one on a cart. In this way, the pieces needed to weld one drum were stored together and could easily be moved to the welding area. This type of scenario is also true for companies that may outsource parts to a vendor. Though it may cost more to have parts delivered in batches, it may save more in time than having to organize and search through parts to be able to get to the welding stage. How many times each piece is handled in the shop may be an eye-opener to reducing wasted time. To measure such an intangible as this, operators are asked to put a soapstone mark on the piece each time it is touched – some companies are surprised to find out how many times a part is picked up, transported and laid down in the manufacturing process. In the case of one company, moving the welding shop closer to the heat treatment station eliminated four extra times that the part was handled. Basically, handling a part as few times as possible and creating a more efficient production line or work cell will reduce overall costs. Searching for the best MIG Welders? We recommend Welding Supplies Direct & associated company TWS Direct Ltd is an online distributor of a wide variety of welding supplies, welding equipment and welding machine. We supply plasma cutters, MIG, TIG, ARC welding machines and support consumables to the UK, Europe and North America.
Put a vent hole in anything you weld that will be sealed up completely: Put a vent hole in anything you weld that will be sealed up completely or air will heat up and expand and blow away your shielding gas or even blow out at the end of the weld bead. Some machined joints that are sealed on one end will not even allow you to start welding because the fit is so good that the part is air tight before you even weld. Other machined parts where a part is pressed in and bottomed out can give cracking problems because there is no where for the part to shrink. If you have to weld something that has been pressed in and bottomed out, make sure to add more filler metal than average to tacks and the final weld bead. That is to prevent the cracking that happens when you run a concave bead and the metal has nowhere to shrink.
Welding supplies tricks: how to become a better welder and how to select the best welding equipment. Use the smallest tungsten that will get the job done. Use the smallest tungsten to get the job done. …within reason. Another way of saying this is don’t just use a 1/8” electrode for everything. There are jobs where a 1/8” electrode is great like for welding 3/16” thick aluminum. But what if you are welding on the edge of a .030” turbine blade? A .040” electrode will be plenty to handle the 15 amps and will give much better starts than even a 1/16” electrode. Too large an electrode can cause an erratic arc and contamination…and A bad start where the high frequency tries to arc up inside the cup and off the side of the tungsten can easily melt off a thin edge and scrap an expensive part. 2% thoriated or lanthanated tungsten electrodes hold up at high amperage better than most all other electrodes. When welding at higher amperages, often times you can use one size smaller electrode by using 2% thoriated or lanthanated. And that is a good thing.
Keep in mind that heavy-duty MIG welding often produces a lot of heat, sparks and spatter, and requires a lower degree of dexterity than some other forms of welding. Therefore, using thick, stiff leather gloves that provide a higher level of protection is smart. Similarly, choose leather footwear that covers your entire foot and leaves as little room as possible for spatter to fall along your ankle line. High-top leather shoes and work boots often provide the best protection. Finally, always be sure you have adequate ventilation per OSHA recommendations and check material safety data sheets (MSDS) for each metal being welded and filler metal being used. Use a respirator whenever required by the MSDS.
The arc is shaped like a cone, with the tip at the electrode and the base on the metal being welded. The closer the electrode is held to the metal, the smaller the base of the cone — but as you pull the electrode farther away, the base (and puddle) gets larger. If the puddle gets too large, gravity will simply pull it away from the base metal, leaving a hole. This is why thin-gauge metals are especially challenging for beginners. Perhaps the most important skill needed for TIG welding is moving the torch in a controlled manner, with steady forward movement, while keeping the gap between the tip of the electrode and the base metal consistently small — usually in the range of 1/8 inch to 3/16 inch. It requires a lot of practice to precisely control the arc length, keeping it as short as you can without allowing the electrode to touch the base metal or filler rod. Source: https://www.weldingsuppliesdirect.co.uk/.
Drakebox chip tricks? The best form of chip tuning is where a custom map can be inserted that takes into account your cars strengths and weaknesses and any other modifications that you have had done. There are still a few companies out there offering replacement chips set to a more sporty setting. This is not to be confused with piggy back chips or plug in boxes. These are only useful in cases where a reflash or replacement chip is not available and it would still be better to buy a whole aftermarket ECU and use this.
Even though you have made modifications in your car, the ECU still continues to get an input of the old data which is stored in it’s memory. This old data no longer is credible as it pertains to conditions that existed before the modification. The input data to the ECU should pertain to the post modification situation of the components and parts introduced, while making the modification. This means that you have to erase the old data from memory and new data pertaining to post modification should be logged into the ECU memory by mapping in new readings. This is the reason why ECU resetting is essential for optimum performance after any modification has been carried out in your car. Read more info on centralina aggiuntiva auto.
I bought mine DAMOS for 100€ with complete ECU documentation in German…so many switches, limiters and maps that are not taught or even mentioned in basic remap guides – I found basic maps by myself but it took ages of reverse engineering and I still didn’t know what exactly each map is…with this Kamikaze style I made my first ECU remap. And if you think all is finally over because you have found DAMOS for your ECU…it is almost impossible to find or buy compressor maps for turbochargers. Sure there is lots of maps around but each car, manufacturer, even engine has different turbo with different parameters such as trim and A/R . Skoda Octavia 2 vRS 2.0TDi PPD engine has got Garrett GT1749V, Golf too…yet each may have different turbo parameters.
The reserves of the manufacturers – that is why chip tuning makes sense. In the development stage, the manufacturers of the engines always allow for certain reserves, so each engine operates well, always and everywhere. Depending on the engine, these reserves can amount to 40%. Both the hardware (i.e. the fitted parts) and the software for the control of the hardware must be designed for use by the general public. The manufacturers ask themselves: Who will drive with it? A granny who drives two miles to the bakery or indeed rather a youngster on the race track? Where is the engine used? In the cold north at minus 20°C or in the Sahara Desert in extreme heat? The manufacturers must consider all these factors and ensure that the engine they design delivers its performance without suffering any damage. Safety and a long service life are very important factors because the manufacturers guarantee them, of course! But still, your engine requires different values for optimal performance in the US than in the desert. In order to adapt the maps according to the actual load, you should do chip tuning.
The chip in your auto’s dashboard, otherwise called the electronic control unit, is the segment of your auto that supervises the greater part of the electrical frameworks in the vehicle. Vehicles worked after the mid-1970s have these chips; they control the fuel infusion, start, vehicle security, speed overseeing, valve direction and different frameworks too. Since every producer uses a marginally unique chip innovation, and everyone is balanced in an unexpected way, it’s imperative that you inquire about your vehicle and look for ecu tuning files bmw expert meeting before you start.
Increased Performance: Engine chip tuning can be done to remove limits that are placed on your engine by the manufacturer. This can result in a variety of different results, depending on how you modify the chip. You can gain greater horsepower, and thus a greater top speed and a faster rate of acceleration, or you can prioritize fuel efficiency, helping you save money at the pump over time. Read more details on drakebox.
Women clothing online store with this year style is a huge topic this summer. Let’s see what are the latest news in the fashion industry, what people wear in 2019. Paco Rabanne! Yes: Terms that were banned from the lips of the fashionable while streetwear and athleisure reigned are now being rehabilitated—couture, tailoring, and glamour being top among them. It’s not just a mechanical swing of the pendulum from one thing to the opposite, but a psychological response to events. Paco Rabanne’s Julien Dossena understands exactly why: “It’s about how you uplift yourself through dress. In the end, that’s all we expect from fashion. You know—that thrill when you wear something special? It gives you power; it gives you confidence.”
Bigger is better, as far as JW Anderson is concerned. I loved the brand’s chunky gold link necklaces, billowing dresses, oversize coats, and wide belts—not to mention the beautiful prints and fun colors. All in all, the show was definitely a highlight of the entire fashion month.
Itty Bitty Bags: “A small, structured style in a new shape is the statement bag of the season,” said Basloe. “We recommend combining two handbag trends by choosing snake print or croc-embossed leather, which are also big.” If you wanna go even smaller, the next “big” bag trend is teeny. Meet The Bitty Bag. TBB is an impractical accessory that holds approximately one Airpod, but the absurdity is part of the charm. Jacquemus created a meme sensation, but designers like Salvatore Ferragamo, Chloe and more can provide a little inspiration. Shop the Season’s Hottest clothing Trends at MooseStyle! MOOSE STYLE Store is the virtual home for an unrivaled collection of the world’s most coveted brands of men’s and women’s designer apparel, shoes and accessories. We provide the highest quality online shopping experience and impeccable customer service.
She sells sea shells, and we’re buying it all up in the form of jewelry and hair accessories. According to von der Goltz, the shell trend “seemed to be everywhere last summer, [but] has grown to include pearls and beads this season.” It ties in to the aforementioned ‘California Cool’ trend, but with a wanderlust spin. Affectionately dubbed “souvenir jewelry” by her team, the trend also “includes anything with shells, pearls, coins, or stones. It’s an elevated take on the jewelry finds one would snag at a fabulous local shop on holiday” Schafer also chimed in, stating that “shell jewelry has transformed from beach basic to elevated elegance. Shell studs, charms, and pendants are the coveted accessory this summer.” You don’t have to invest your paycheck to partake in this, either. “A great way to buy into some of these summer trends is through hair accessories,” von der Goltz suggested. “We’re seeing this category grow with each season and include everything from hairclips to headbands to headscarves.” Her favorite accessory brands are Valet and Eliou, which contrast precious stones with color and whimsy.
Finally, we can safely wave goodbye to shorts that are uncomfortably (for everyone) short. It started with the rise of the bike short, followed by the short suit, and led us to the return of jorts (jean shorts). Great lengths are the new thing, and we’re here for it. Source: https://www.moosestyle.com/.