High quality led string light wholesale provider

Best rated led decorative lights manufacturer: Christmas GlamorLED LEDs are a high quality, commercial grade product. The system of Diodes means that there are no bulbs to replace or become damaged. They are also incredibly robust and essentially; extremely inexpensive to run. Remember that not all LEDs are equal – Christmas GlamorLED LEDs all have a minimum arc of light of 120 degrees, whilst some lesser brands may have as little as 60 degrees. Light emitting diodes, commonly known as LEDs are small lights illuminated by the movement of electrons within a semi-conductor material. You may think LEDs are new technology however this isn’t the case, you will be used to seeing them everyday. Digital clocks, remote controls, car headlights and even traffic lights use LEDs. Discover even more information at https://www.glamorled.com/products-2017.

Dimming and Color Control – Unlike LED bulbs, all LED strips are dimmable when paired with the correct equipment. There are two methods of dimming LED strips: a traditional phase-cut wall-dimmer, or a DC low-voltage dimmer. The AC phase-cut dimmer approach is typically most ideal for residential and commercial lighting applications where the dimming input signal comes from a traditional wall-switch dimmer. This setup requires a TRIAC dimmable power supply. The aluminum channels may help dissipate the heat from the LED strips, but for the most part they are not necessary for thermal management and are primarily for mounting and diffusion purposes. A DC low-voltage dimmer or (RGB) controller is typically in the form of a manual or digital dimmer module that is placed between the DC power supply and the LED strip. This approach is best suited for color changing applications or less permanent lighting installations.

Durability: Compared to traditional neon lights, LED neon flex lights have a longer service life. Flexibility: These fixtures are flexible and can be bent or shaped to fit various design requirements. They can be easily installed in different configurations and complex shapes, allowing for creative and customizable lighting designs. Versatility: This lighting option can also offer color-changing and dimming capabilities. Low maintenance: LED neon flex requires minimal maintenance, thereby saving you money in the long run.

Energy Management: Smart street lighting systems allow for dynamic control of lighting levels based on factors such as traffic flow, weather conditions, and time of day. This results in even greater energy savings and reduced light pollution. Remote Monitoring: Municipalities can remotely monitor the status of individual street lights, identifying faulty or malfunctioning fixtures without sending personnel to inspect each one manually. This enhances maintenance efficiency and reduces response times.

Demand in market: Led lights are used for different purposes. Everyone prefers LED lights because of their unique advantages. In the street, it provides good enough light. Due to its long-lasting performance and energy efficiency, people prefer it. Street lights for the long term glow the area, that is why people prefer them, and the demand is increasing in the market. Big electronics manufacturing companies have started investing in LED street lights. They are considering it as the next big thing in the lighting market. Only in 2013 LEDs business flourished rapidly, and it was worth one billion dollars only in that particular year.

Choosing LED decoration light manufacturers is a complex decision and requires careful consideration. With the right research, you can find the best LED light manufacturers for your business, who will provide you with quality products, reliable customer service, and reasonable prices. By taking the time to consider your options and ask the right questions carefully, you can make sure you’re getting the best LED lighting for your needs.

Driver: The street LED light is the heart of the pole. When the driver stops working, the common phenomenon is that the driver also stops working or flickers. To save yourself from this kind of problem use a high-quality brand. Choose the famous brand which manufactures suitable components. LED street lights are an excellent option to choose to reduce the cost of electricity. They are also environmentally friendly and energy efficient. If you want to invest in LED lighting sources, then consider Glamor. We have a wide variety of LED decorative lights at affordable prices.

Evaluate Customer Service: When selecting a LED Decoration Light Manufacturer, it is vital to evaluate customer service. Make sure to ask questions about their policies and procedures and their availability for customer support. Ask about the company’s warranty and return policy. You should also inquire about the company’s track record for delivering quality products on time and within budget. Additionally, find out if the manufacturer offers any customization or customization services. You should also check what types of payment methods the manufacturer accepts and whether they offer discounts or specials.

We use high-quality environmentally friendly materials in raw materials, which not only makes the products more durable, but also does not pollute the environment. The IP65 waterproof level makes the LED motif lights can be used outdoors and in extreme weather. Our professional engineering team ensures that every LED motif lights will undergo rigorous testing before shipment. Our outdoor LED motif lights adopts a detachable design structure, which saves the packaging volume and reduces the transportation cost. It is also easy to install and can be fixed to ensure safety. Our 50,000-square-meter delivery room and more than 1,000 employees ensure huge production capacity and can meet the huge needs and delivery times of customers.

Glamor led decoration light manufacturers have got more than 30 patents so far. Glamor is not only qualified supplier of China government, but also highly trustful supplier of many well-known international companies from Europe, Japan, Australia, North America, Middle East etc. Glamor LED decorative lights has been in the industry for 18 years. Our product categories include LED string light, LED rope light, LED neon flex, SMD strip light, LED bulbs, LED motif light etc. The main products have got CE, GS, CB, UL, cUL, ETL, CETL, SAA, RoHS, REACH approval. See additional information on https://www.glamorled.com/.

If you have your idea or any effect you want to achieve, Glamor led decoration light suppliers can be your reliable partner to custom the items you need, including OEM&ODM, we have our professional team with over 19 years to custom decorative lights and illumination lights, such as LED motif light, LED string light, SMD strip light, neon flex, led rope light etc., all is suitable for project, wholesale, retail, online or offline selling are available.

So, what is LED neon flex? LED neon flex is a flexible lighting product that replicates the appearance of traditional glass neon lights using energy-efficient LED technology. It consists of flexible tubing made from a transparent or translucent material, typically PVC or silicone, which houses small LEDs. The LEDs are strategically placed inside the tubing to emit light evenly and create a neon-like glow. LED neon flex requires an external power supply to provide the necessary electrical current. When the power supply is connected, electrical current flows through the circuit, energizing the LEDs. As a result, the LEDs emit light, which passes through the tubing material, creating the neon-like effect.

Battery-Powered or Plug-In Options: LED string lights are available in both battery-powered and plug-in versions. Battery-powered options offer flexibility in placement, while plug-in lights are a convenient choice for longer-lasting displays. Remote Control and Smart Features: Some LED string lights come with remote controls or smart features, allowing you to control the light’s brightness, color, and lighting modes. This adds convenience and versatility to the decorative possibilities. LED string lights have become a popular choice for a wide range of applications, including holiday decorations, wedding ceremonies, parties, home decor, and ambient lighting in both indoor and outdoor settings.

9 07 24

Excellent led strip lights provider

Christmas lights factory by GlamorLed: LED strip brightness is typically described in lumens per foot (or meter). A good quality LED strip should provide at least 450 lumens per foot (1500 lumens per meter), which provides approximately the same amount of light output per foot as a traditional T8 fluorescent lamp. (E.g. 4-ft T8 fluorescent = 4-ft of LED strip = 1800 lumens). LED strip brightness is primarily determined by three factors: Light output and efficiency per LED emitter; The number of LEDs per foot; The power draw of the LED strip per foot. An LED strip light without a brightness specification in lumens is a red flag. You will also want to watch out for low cost LED strips that claim high brightness, as they may overdrive the LEDs to the point of premature failure. Discover more details on strip lights manufacturers.

Aluminum Channels & Heatsinking – Despite their versatility and ease of use, LED strips are nonetheless bare circuitboard components. Mounting the LED strips inside of an aluminum channel, along with a diffuser cover, can significantly improve the aesthetics of a lighting installation. Aluminum channels are typically long pieces of extruded aluminum in a U or V shape. The LED strip is them placed and secured (using the double sided tape) at the bottom of the channel. A long piece of frosted polycarbonate plastic (typically provided with the aluminum channel) then snaps onto the top of the aluminum channel. You may have correctly read elsewhere that LEDs need effective thermal management for reliable operation. Higher quality LED strip light products actually underdrive the LEDs, and are designed to last tens of thousands of hours without any heatsinking. During operation, the LED strip can get warm to the touch, but the temperature rise is far below the thermal limits of the LEDs and circuitboard components. (Our products typically exhibit temperature rises of 55 F or 30 C over ambient temperatures, without any heatsinking).

Easy Installation One of the factors that makes LED neon flex a preferred lighting solution for a wide range of applications is the ease of installation. It often comes with mounting clips, brackets, or aluminium profile for attachment to various surfaces. In addition, it comes with connectors or wiring accessories that facilitate the electrical connections between different sections. Advantages of LED Neon Flex: Energy efficiency: These lights consume up to 75% less energy than traditional neon lights.

Different types of street lights are available in the market. You can choose the LED street light as per your requirement and quickly find out at Glamor. Advantages of LED Street Lights : The important factor of street LED selling is its long-life performance. In LED lights, there is no filament which can quickly burn out. LED light doesn’t contain any toxic chemicals which are harmful, like mercury. Maintaining LED lights is not too costly; they are non-expensive than typical bulbs. LED light does not produce heat as the bulbs produce. After the invention of LED street lights, people replaced conventional bulbs with LED lighting sources.

Surge protection devices: The street lights are installed outside, so the street LED lights are equipped with 10KV surge protection which is also known as SPD, the SPD can resist many small-size surges, but at every strike, the life of SPD becomes shorter. If the surge protection devices stop working, the street LED light keeps working, but the LED light breaks down the next strike, and you will replace it. Some suppliers sell LED street lights without surge protection devices to increase sales or attract clients. It may look like low cost but it is not a long-term activity.

GLAMOR LED Decoration Light Manufacturers: How To Choose LED Decoration Light Manufacturers? Research LED Lighting Manufacturers: When choosing LED decoration light manufacturers, it is vital to research LED lighting manufacturers and compare the quality, price, and service they offer. It would be best if you also considered the reputation of the manufacturer, the warranty they offer, and the availability of spare parts. Additionally, it is important to look into the types of LED lighting they provide and the available range of products. Finally, it is essential to find out if the manufacturer has excellent after-sales service.

This is a project of one of our client in Europe. Our cooperative customers are large contractors companies. The main type of application of our products is in large-scale outdoor projects show, such as commercial centers, large squares, and main streets. Many our products of LED string lights,LED rope lights and LED motif lights and other lighting are used in this lighting show. Our Customers choose our LED motif lights mainly because of their good effect and high quality. We use the highest quality LED, which make the effect and long life.

Glamor is well-known as the Leader manufacturer of integrated Plastic panel light in China, it’s high temperature resistance plastic housing and aluminium plate for heat dissipation, high quality LED chips and advanced driver solution. All of our Glamor Panel light are private mould and patented lighting products. Glamor use many types of the LED lighting to decorate the Christmas Event, including LED string light, LED rope light, LED motif light, LED strip light and so on. Glamor focus on providing customer with high-quality LED lighting to meet the needs of various project. Read even more information at https://www.glamorled.com/.

Glamor led decoration light manufacturers has three major product series, LED decorative lights, SMD strip lights and illumination products. Glamor LED decoration lights are recognized as high-end products in the decorative light industry. The product categories include led rope lights, led string lights, led motif lights, decorative bulbs and intelligent controlled decorative products. Excellent quality, international certify standards and professional services help Glamor becoming a high-quality china supplier. Glamor lighting brings joy and hope to all over the world.

Variety of Colors: LED string lights are available in a wide range of colors, including warm white, cool white, red, blue, green, and multicolor options. This variety allows for creative and customizable lighting displays. Flexible Designs: LED string lights come in various designs, including fairy lights, globe lights, icicle lights, and more. The flexible wire or string allows for easy shaping and wrapping around objects, making them suitable for a variety of decorative purposes.

5 07 24

Custom led string lights manufacturer 2024

Excellent led strip lights provider: Adaptive Lighting: Using sensors and data analytics, smart street lighting systems can adjust lighting levels in real time. Brightness can be dimmed during periods of low activity, reducing energy consumption while maintaining adequate safety levels. Enhanced Safety: Bright and well-illuminated streets contribute to improved safety for pedestrians and motorists. Smart systems can detect unusual activity or accidents and increase lighting levels accordingly. Discover extra information at https://www.glamorled.com/products-2014.

Perhaps the main advantages of LED lights is that they are exceptionally energy efficient. In regular incandescent bulbs the light is produced by the heating of the light filament which is completely wasted energy. LED lights produce no heat, they are cool to the touch and are very eco friendly. There is no UV, lead or mercury in LEDs so they are perfect for eco projects and green business schemes. We would estimate our LEDs should last up to 100,000 hours and use 90% less energy than a traditional filament set of Christmas lights would. This is of huge benefit to both commercial clients and domestic customers. In the current economic environment money saving is key and LED string lights prove essential in producing cost effective lighting displays.

Determining LED Strip Quality – Sometimes, it can be tricky to distinguish between LED strip lights designed for high performance and longevity, and those that are not. Below are some pointers for knowing where to look. Circuitboard Composition & Quality – For higher power LED strips, the quality and specification of the underlying circuitboard is paramount. Because high levels of electrical current must travel through each section, sufficient copper material is needed. Look for LED strips with a copper weight of at least 2 oz, and ideally 4 oz to ensure the circuitboard can handle the higher power – otherwise, you can become victim to voltage drop.

LED string lights are a type of decorative lighting that uses light-emitting diodes (LEDs) as the source of illumination. These lights are arranged in a string or a flexible wire, often with evenly spaced bulbs. LED string lights have gained popularity due to their energy efficiency, durability, and versatility in various applications. Here are some key characteristics and features of LED string lights: LED stands for Light Emitting Diode. Unlike traditional incandescent bulbs, LEDs produce light through the movement of electrons in a semiconductor material. LED technology is known for its energy efficiency, long lifespan, and low heat emission.

Interior Design: Another common application for LED neon flex lights is creating unique lighting designs and decorative effects in interior spaces. You can use these lighting fixtures to accentuate wall art, create ambient lighting in bars and clubs. Event and Stage Lighting: LED neon flex is widely used in event and stage lighting. It can be used to outline stages, create colorful backdrops, and add vibrant accents to concert venues, theaters, and other performance spaces.

Quality Assurance: Choosing the proper LED decoration light manufacturer ensures that the products you receive are of the highest quality. LED lights are known for their durability and longevity, so it is crucial to choose a manufacturer that is committed to delivering the highest quality products; Cost Savings: When you choose a reliable LED light manufacturer, you are ensuring that you are getting the best value for your money.

Street LED lights can work with their electricity produced with solar power and the excess energy sent back to the connected grid. It can be possible with the help of so-cal adoption of a smart electricity grid. Street lights with solar panels are widespread in the market. You can find it anywhere around the corner. Save global warming environment friendly: Global warming is a big issue for the earth. It is increasing day by day. We need to use eco-friendly products that do not destroy the environment. Light-emitting diodes are environment-friendly and do not produce ultraviolet light.

Choosing the right LED decoration light manufacturer is essential in ensuring you get the best quality products for your home or business. There are many LED manufacturers out there, so it’s important to take some time to research and compare them before making a decision. Factors to consider include the manufacturer’s reputation, experience, product range, pricing, customer service, and warranty. It’s also important to keep in mind the type of LED product you need and any specific requirements you have. With the correct information and research, you can easily find an LED decoration light manufacturer that meets your needs.

Full die-casting: In simple words, die casting means that all parts of street LED light are made of die casting. The structure consists of LED radiators, connected with the lamp housing. The LED light emitting component is just a single piece which is easily fixed on the body of the pump with the help of screws. If you want to change the LED, the whole body will be changed, and it will be more costly to replace as compared to the modular.

Glamor is well-known as the Leader manufacturer of integrated Plastic panel light in China, it’s high temperature resistance plastic housing and aluminium plate for heat dissipation, high quality LED chips and advanced driver solution. All of our Glamor Panel light are private mould and patented lighting products. Glamor use many types of the LED lighting to decorate the Christmas Event, including LED string light, LED rope light, LED motif light, LED strip light and so on. Glamor focus on providing customer with high-quality LED lighting to meet the needs of various project. See additional details at https://www.glamorled.com/.

How Does LED Neon Flex Work? LED neon flex works by utilizing light-emitting diodes housed within a flexible tubing material to create a neon-like lighting effect. The tubing allows the light emitted by the LEDs to pass through and create a uniform and diffused glow. The LEDs within the LED neon flex tubing are connected in a series or parallel circuit configuration. The wiring ensures that the electrical current flows through each LED, causing them to emit light.

2 07 24

High quality continuous inkjet printer manufacturers

Cij printer manufacturers today: While over 95% of other printers have not yet incorporated this technology but rely on the outdated cylindrical dot phase detection, which in turn affects the quality of the printing. For instance, the equipment forefront manufacturing is divided into four main components that ensure more straightforward and fast maintenance and easier printer condition monitoring as well as easier to transport when you are relocating to a different location. Maintenance also becomes more rapid, lasting less than five minutes. On the other hand, about 98% of the inkjet printers use the densely packed ink belts, parts, and pipes. It is important to note that most professionally engineered components might be difficult to modify and sometimes not possible at all. With such models, even with a minor technical problem, only the factory can fix it means than the equipment will be repurchased to the factory for further investigation, and this means time and resource wastage. Read even more details on cij printer.

Attention should be paid to the care of the CIJ printer: first of all, the machine should be regularly checked, the installation of the print head and the electric eye and the fixing device, the connection of the power supply and the ground wire, and the cleaning of the fan filter regularly. Secondly, the CIJ printer must clean the nozzle before shutting down and power off, and put the nozzle on the nozzle cover with moisturizing sponge pad, so as to ensure the condition of the nozzle and the quality of the code, and also extend the nozzle to a certain extent the service life. To prevent ink, cleaning liquid, etc. from entering the nozzle, if the socket is contaminated, it should be cleaned quickly with alcohol.

Founded in 2011, Leadtech Inkjet Printer is committed to research, manufacture and sales of small character continuous inkjet and laser coding machines, such as, cij printer, laser printing machine, and provide customized solution. Welcome to join Leadtech Coding and become Lead Tech printer continuous inkjet printer distributors for win-win cooperation. Let’s seize market opportunities and create wealth together.

The Power and Flexibility of High-Resolution Inkjet Printers: Versatile Printing Capabilities – One of the most laudable features of high-resolution inkjet printers is their versatility. These printers can handle an array of different printing materials, including photographic paper, canvas, vinyl, and various fabrics, making them suitable for a broad range of applications. Moreover, they can produce color-rich and detailed images, making them the printer of choice for professionals in industries where precision and detail are crucial. With an unwavering commitment to quality, market-oriented focus, and continuous innovation and improvement, LEAD TECH has acquired over 20 patents and earned the prestigious title of a national high-tech enterprise.

Since the outbreak of COVID-19, the protective face mask has become a necessity of life at this stage. However, the huge demand gap has caused some unscrupulous traders to take advantage of the situation, a large number of inferior masks have flowed into the market, and entries related to frauds of fake masks have been frequently searched. False masks not only have no protective effect, but also have the risk of being contaminated because the production environment is not up to standard, which is extremely harmful to personal health. The most direct way to identify genuine and fake masks is to check the laser anti-counterfeiting marks. Therefore, a good choice is to use UV laser marking machine for making medical surgical face mask during the marking processing process.

In recent years, with the rapid economic development and the rapid improvement of living standards, consumers have increasingly higher requirements for product information labeling, and some corresponding laws and regulations have also strengthened regulation and management, so the demand for CIJ printers by various enterprises also keeps rising. For many ordinary people, it may not be known what the CIJ printer is, it seems to have nothing to do with our daily life, and it has never even been in our lives. However, in fact, it is very close to our lives, and it exists in all aspects of our daily lives. As long as you observe it carefully, you will find it everywhere, such as the production date, batch number, barcode and anti-counterfeiting marks on various product labels in shopping malls, trademark patterns, etc. are actually formed by the CIJ printer. Read additional details at https://www.leadtech.ltd/.

The continuous inkjet printer has almost become a common equipment in the production line of the food and beverage industry. For customers, it is crucial to choose the corresponding technology and ink to design a coding solution that meets their own production materials and production environment. Let’s talk about the application of the continuous inkjet printer in the beverage industry. The production environment of the beverage industry is more complex, and the labeling requirements are also different. The logo of the beverage industry has very specific and strict requirements in law. In addition to the bar code on the outer packaging box, the production date, the shelf life of the beverage and the batch number, etc. should be clearly read by consumers, and at the same time it must be consistent with the overall appearance on the packaging box. The code should be clear to the shipper and distributor.

Flexibility: The adaptability of CIJ printers is another quality that stands out. CIJ printers’ non-contact printing method allows them to print on an extremely broad range of substrates. A CIJ printer can print on a wide variety of materials, including plastic, metal, glass, and even coated paper. In fields like electronics and medicines, where items come in a wide range of forms and materials, this quality is crucial. CIJ printers are able to immediately adjust to these shifts without interrupting operations.

A well-made CIJ printer will be able to successfully complete high-velocity printing tasks for years if given proper maintenance. This is made possible both by an automatic monitoring system that enables quality control, as well as the durable construction that certain CIJs are known for. A Wide Variety of Available Inks – CIJ printers can reliably use an array of inks with diverse applications, colors, and drying properties. Unlike other inkjet models, CIJ machines can use MEK (methyl ethyl ketone)-based inks, which can dry in under one second. Another unique ink option includes HyperCook thermochromic ink, the most advanced retort-proof ink on the market.

Working Mechanism of Inkjet Printing: Now that we’ve understood the principle of high-resolution printing, let’s move on to the mechanism of how inkjet printers, the heroes of high-resolution printing, function. Inkjet printers operate based on a relatively straightforward yet elegant method. The key operation revolves around propelling droplets of ink onto a printing medium, which is typically paper. This propelling action is controlled by several tiny nozzles situated on the printer’s head. These nozzles, also referred to as jets, release ink onto the paper following a specific pattern, which is determined by the printer’s software.

28 06 24

Custom led Christmas lights wholesale manufacturer in China

Strip lights manufacturer and supplier with GlamorLed: Longevity: LED street lights boast an extended lifespan compared to conventional lights. High-quality LEDs can last up to 100,000 hours or more, reducing maintenance and replacement costs substantially. Instant Illumination: Unlike some traditional lights that take time to reach full brightness, LEDs provide instant, consistent illumination. This contributes to improved visibility and safety on the streets. Smart Street Lighting: Merging Efficiency with Intelligence – Smart street lighting takes the benefits of LEDs a step further by incorporating intelligent control systems and data-driven solutions. These systems enable remote monitoring, adaptive lighting, and real-time adjustments, contributing to a host of advantages for urban environments. Discover extra details on custom led Christmas lights.

LED lights are very similar to traditional fairy lights except that they do not have a filament inside the bulb that can burn out and make the set redundant. A specific benefit of LED lights is their hard-wearing durability. With no fragile filament and no glass parts, being both resistant to temperature and impact they are the smart choice for all manner of lighting displays. Gone are the days of buying spare Christmas light bulbs each year. Originally only produced in red, their popularity grew when other colours were introduced and unlike filament bulbs which are white with a coloured glass cap LEDs are actually coloured semi conductors so the light is a brighter truer colour.

LED Quantity & Quality – The efficiency, quality and stability of light output is directly determined by the LED emitters. Look for LED strip lights that place stringent quality controls and specifications on the LED emitters, and watch out for LED strips that claim a high power despite a low LED count, as this can indicate overdriving the LED emitters, leading to premature failure. LED Strip Surface – High quality LED strips will usually include an extra coating of white paint to help increase the reflectivitiy of the light and increase overall light output. Lower cost LED strip options will use skip this step, keeping the copper color exposed. This can affect both the brightness and color of the light, especially in an aluminum channel installation.

Energy Efficiency: LED string lights consume significantly less energy than traditional incandescent lights. They are more environmentally friendly and can result in cost savings over time. LED bulbs have a longer lifespan compared to incandescent bulbs. They can last tens of thousands of hours, making them a durable and long-lasting lighting option. Cooler Operation: LEDs emit very little heat, making them safer to touch and reducing the risk of fire hazards. This characteristic is especially important for indoor and outdoor applications.

Retail Displays: This type of LED lighting solution is an excellent choice for retail displays and visual merchandising. It creates attention-grabbing lighting effects around product displays, shelves, or window displays. Moreover, their flexibility allows for creative and unique designs that help draw customers’ attention. Outdoor Landscaping: Since they are weather-resistant, LED neon flex wholesale lights are suitable for a wide range of outdoor applications. These lights can be used to illuminate pathways, garden features, water fountains and landscape elements.

Brightness: The street LED light illuminates quickly when you turn it on. It instantly brightens the environment rapidly with one touch. As traditional bulbs required a specific heat to illuminate the area properly, at the same time, LED light rapidly worked. Street LEDs’ response is rapid when you turn it off and on. Energy efficient: Light emitting diodes are too much energy saver as compared to typical bulbs. Everyone wants energy-efficient products that fulfill the requirement of energy savers. The street lights work for the whole night and consume too much electricity. After using LED street lights, you can save more than 50% of electricity.

Variety of LED Street Light: A specific image comes to mind when we talk about LED street lights. But now you can find different designs and variants. Consumers have different choices; they can use modular street LED lights and full die-casting street lights. The modular power range is between 30 to 60 watts. In this type of light, there are 4 to 5 modules. The replacement and maintenance are straightforward. If you have a bit of knowledge of changing light, you can easily replace it on your own.

Glamor led decoration light manufacturers have got more than 30 patents so far. Glamor is not only qualified supplier of China government, but also highly trustful supplier of many well-known international companies from Europe, Japan, Australia, North America, Middle East etc. Glamor LED decorative lights has been in the industry for 18 years. Our product categories include LED string light, LED rope light, LED neon flex, SMD strip light, LED bulbs, LED motif light etc. The main products have got CE, GS, CB, UL, cUL, ETL, CETL, SAA, RoHS, REACH approval. Discover more information on https://www.glamorled.com/.

Glamor led decoration light suppliers has more than 300 staffs and hundreds sets of advanced machines, all the welding and assembling job was done by machine. We have ability to ship more than 30 containers per month, so we can handle big order more easily. Glamor led decoration light manufacturers has strong production ability that our monthly output can be as 1 million meters Led rope light, 100 thousand sets Led string light, 600 thousand pcs Led bulbs, 15 thousand Led motifs.

Dimmable: Many LED neon flex fixtures offer dimming capabilities, allowing users to adjust brightness levels. Users can create different lighting moods and atmospheres based on their specific needs and preferences. Color Options: You can choose LED neon flex fixtures from a wide range of color options, including single-color versions and RGB (red, green and blue) variants. Control Options You can control LED neon flex using basic control and advanced options. Basic control options include simple on/off switches, while more advanced options include remote controls, wireless control systems, or programmable controllers that enable dynamic lighting effects, color sequencing and synchronized patterns.

17 06 24

Custom led string lights wholesale provider right now

Top Christmas lights manufacturer and supplier: LED Density & Power Draw – You may come across various LED emitter names such as 2835, 3528, 5050 or 5730. Do not worry too much about this, as what is most important in an LED strip is the number of LEDs per foot, and the power draw per foot. LED density is important in determining the distance between LEDs (pitch) and whether or not there will be visible hotspots and dark spots between the LED emitters. A higher density of 36 LEDs per foot (120 LEDs per meter) will typically provide the best, most evenly distributed lighting effect. LED emitters are the most expensive component of LED strip manufacturing, so be sure to account for LED density differences when comparing LED strip prices. Find more details at custom led Christmas lights.

Individual LEDs are mounted along the strip, typically at densities of 18-36 LEDs per foot (60-120 per meter). The light color and quality of the individual LEDs determine the overall light color and quality of the LED strip. The backside of the LED strip includes pre-applied double-sided adhesive. Simply peel off the liner, and mount the LED strip to virtually any surface. Because the circuitboard is designed to be flexible, LED strips can be mounted on curved and uneven surfaces. Determining LED Strip Brightness – Brightness of LED strips is determined using the metric lumens. Unlike incandescent bulbs, different LED strips can have different levels of efficiency, so a wattage rating is not always meaningful in determining actual light output.

Architectural Lighting: These lights can be used for accent lighting and highlighting architectural features of buildings. They can be installed along the contours of structures, such as facades, columns, arches, and windows. LED neon flex lights perform exceptionally well when it comes to enhancing the visual appeal of architectural features and creating a striking nighttime effect. Signage: LED neon flex lights are often used for illuminated signage, both indoors and outdoors. They can be used to create vibrant and eye-catching lettering, logos, and symbols for storefronts, restaurants, hotels, and other commercial establishments.

Street LED light consumes around 15% of energy compared to bulbs. And they produce more light per watt. A street LED light produces 80 lumens per watt, but when we consider a traditional street bulb, it just produces 58 lumens per watt. All kinds of LEDs are energy-saving. You can find a different variety of LED lighting sources at Glamor. Self electricity producer: Street lights can produce enough energy for themselves with the help of solar power. LED street lights use a very low amount of energy, and instigated with small solar panels, they can produce enough electricity.

Check Credentials: When selecting the LED decoration light manufacturers, it is important to check the credentials of the manufacturer. You should make sure the manufacturer has a good reputation and is a reliable source for your lighting needs. You should also ensure that the manufacturer has the necessary licensing and certifications to produce quality decoration lights. Additionally, you should review the product descriptions and customer reviews to determine if the manufacturer is providing quality products. Finally, you should contact the manufacturer directly and ask questions regarding their production process. This will give you a knowledgeable understanding of how the manufacturer operates and if they are a reliable source of quality lighting.

Glamor is well-known as the Leader manufacturer of integrated Plastic panel light in China, it’s high temperature resistance plastic housing and aluminium plate for heat dissipation, high quality LED chips and advanced driver solution. All of our Glamor Panel light are private mould and patented lighting products. Glamor use many types of the LED lighting to decorate the Christmas Event, including LED string light, LED rope light, LED motif light, LED strip light and so on. Glamor focus on providing customer with high-quality LED lighting to meet the needs of various project. Find additional info at https://www.glamorled.com/.

Founded in 2003, Glamor decorative lights manufacturers has been committed to the research, production and sales of LED decorative lights, residential lights, outdoor architectural lights and street lights since its establishment. Located in Zhongshan City, Guangdong Province, China, Glamor has a 40,000 square meters modern industrial production park, with more than 1,000 employees and a monthly production capacity of 90 40FT containers.

23 09 23

Downlight provider with grnled.com

Best rated magnetic track lighting manufacturer and supplier: How difficult is it to install them? Installing magnetic track lighting is easy. You can install it by yourself, and there’s no wiring involved. Simply mount the track to your ceiling, attach the lights to their channel, mount the metal brackets through powerful magnets, aim them where you want them, plug them in, and turn them on! 4 different installation solutions for magnetic track light system: Recessed installation-Popular way, it is suitable for a new building; surface-mounted. It is easy to do an installation without a ceiling. Suspension installation is perfect for the dining room, meeting offices, etc. Trimless recessed installation, only use screws to fix it onto the hole in the ceiling. Read more details at led light manufacturers in china.

If you’re in a hurry to buy exterior lights, you might be tempted to spend as little time as possible researching your choices. However, this is something that you should avoid at all costs! Don’t just browse through a couple of sites and then buy the first product that catches your eye. Instead, pay close attention to the details of each individual fixture before choosing one. Most LED landscape lights can connect with one another to create a “string” of light fixtures along your property line. However, incorrectly connecting fixtures – or even the incorrect number of lights in a string – can cause the bulbs to burn out prematurely. In addition, you will end up paying more than necessary for energy consumption. Instead, talk with your local electrician about which lights are compatible for creating “strings” and use the recommended number of bulbs in each string.

In general, when people say flood lights or spotlights, they mean the same thing. But technically, there are some differences in beam angle. Generally, flood lights have bigger beam angle like 90/120° which is an application for Lighting up the whole scene, suitable for big area lighting. However, the spotlight fixture is with a narrow beam angle like 25/45/60°, These lights look like a beam of light, and generally, the straight-line distance illuminates will be farther than floodlights. Suitable for local lighting to highlight the characteristics of objects.

GRNLED is a commercial Led floodlight manufacturer, supplier, and factory in China, We can accept OEM/ODM floodlights orders for commercial application. The color temperature can be single color such as 3000K Warm white, 4000K daylight, 6500k cold white, Green / Purple / Orange / Red / Blue, or to be RGB LED Floodlights. Widely applied for commercial outdoor places such as parking lots, backyards, schools, football fields, tennis court lighting, basketball lighting, etc. Fast Delivery: We provide a fast delivery service. mostly for normal led lights, it can be delivered within 3 days fastly. For big quantities, generally, it is 7-15days.

How to connect the Zigbee Smart Gateway and Smart dimmable magnetic track lights? You need to choose and connect the Zigbee smart gateway after you choose the above magnetic track and lights. And need to connect the magnetic track lights to the gateway(hub). You can download the PDF file to know the detailed steps, also check the video here. Remote control magnetic led track light is a kind of smart lighting, based on 2.4G wireless technology, their color temperature and brightness can be adjusted by a remote controller or 2.4G Bluetooth power switch. The color temperature can be tunable from 3000k to 6500K. and the whole magnetic track light system includes different kinds of luminaires such as grid spotlights, track spotlights, linear floodlights, pendant lights, etc, it is the best way to do DIY lighting for your home, or commercial places.

Explosion proof flood LED light: It refers to a floodlight used in dangerous places where combustible gas and dust exist, and can prevent arcs, sparks and high temperature that may be generated inside the lamp from igniting combustible gases and dust in the surrounding environment, so as to meet the requirements of explosion-proof. It belongs to a special kind of lamp, and its protection level is higher than that of conventional floodlights. Suitable for various indoor and outdoor operations and construction sites such as flammable and explosive places, oil fields, offshore oil platforms, ships, metallurgy, petrochemicals, etc.

How many watts is a solar street light? The wattage of a solar street light can vary greatly depending on the size and type of the light. Generally, a solar street light will range from 10 to 150 watts. What are the disadvantages of solar street lights? High Initial Cost: Solar street lights require a significant upfront investment. The cost of a single solar street light can range from $2,000 to $5,000, depending on the size and type of the light. LED street lamps emit white light when the color temperature is around 5000K, and yellow or warm white light when the color temperature is around 3000K. In fact, yellow light or warm white light around 3000K is more suitable for road lighting, while the color temperature of LED street lights around 5000K is not suitable for road lighting. Because the color temperature of 5000K will make people feel very cold and dazzling, which will cause people’s vision to be overly fatigued, and under this color temperature condition, people’s ability to observe in the distance will also decrease, reducing the driving safety of drivers. In addition, in rainy and foggy weather, LED street lights with a color temperature of 5000K have poor penetration ability, which also affects the travel safety of pedestrians.

The adjustable magnet spotlight is improved on the base of the magnetic grid spotlight, but it is available to be 90° adjustment as non-directional lighting, what is more, its beam angle is 24°/36° narrow distribution, generally, widely used for accent lighting for wall washer, background wall, painting, etc. 0-10V/DALI/Smart dimmable available, matt black/matt white body option. The Magnetic track spotlights are based on traditional LED track lights with track heads with magnets. At the same time, the low-voltage DC48V input scheme is adopted. Other parameters and specifications are almost the same, CRI90 Philips Osram CREE COB chips, power includes 10W 15W 20W 30W. Mainly application for kitchen room, dining room, and wall washer lighting as accent light fixtures.

Hybrid Solar Street Lights: Hybrid solar street lights are a combination of standalone and grid-connected solar street lights. They are powered by a solar panel and battery combination and are typically used in areas where grid power is available but unreliable. All-in-one street lights: It is also called integrated solar street lights, there are including a street light head, solar panel, solar controller, and Li-batter into a light fixture. It is easiest to do the installation.

COB led flood lighting: This kind of floodlight uses the previous generation of LED light source technology-COB. Different numbers of LED chips are integrated on a small substrate, which can be assembled and produced quickly. At the same time, COB chips can also be very convenient to customize the color temperature of 2000K-2500K, and the CRI can easily achieve more than 90. SMD: SMD LED Flood lights fixtures mainly use SMD3030, SMD5730 or SMD2835 chips as light sources. It is better in heat performance and higher in brightness than COB types. It is main trend in markets. Read more info on https://grnled.com/.

Always put customer value first. No cutting corners, no breaking promises. The manufacturing of LED lights is not only our work but also our career and life. Manufacturing and exporting LED lights including outdoor led lights like LED flood lights, LED street lights, UFO LED High bay lights, landscape lighting, and indoor LED lights like LED downlights, LED panel lights, LED track lights, magnetic LED lights, etc, most of the LED lights are CE RoHS Standard. For all of the orders, we can do customized designs for color boxes, print logos on the lamp body.

17 09 23

Recommended phone case suppliers in 2023

Best rated custom phone cases wholesale by D-jolly: Protection Against Water – Leather flip phone cases are often water-resistant, as leather is the closest stitched and doesn’t allow water to enter the phone case. On the other hand, typical silicone ones can easily get wet, eventually damaging your phone. Though you can find water-resistant silicon covers, those are more costly than leather ones. Impressive Features – Leather flip phone cases come with magnetic closure that automatically locks your phone once the lid is closed and contributes to that signature clamshell clap sound. Sleek Appearance – Nothing can replace the timeless allure of leather flip phone cases, as these seem of premium quality. Furthermore, the added features like slots, in turn, add to their appeal. See even more information on phone case factory.

Your manufacturer will create the dies in the appropriate shape for each color; they’re then heated and applied using pressure. Each color has it’s own foil, meaning your phone cases will have to go through multiple runs if more than one color is being used. Finally, a die is created and applied to emboss your desired design. A process that places the embossed image in alignment with a printed graphic that is already on your phone case. Resulting in an embossed graphic design. This involves the imprinting and aligning foil over an embossed image to create a foil emboss. The process requires great attention to detail as your manufacturer has to keep the image and foil matched perfectly.

People use their smartphones every day, in fact, people look at their phones on average 85 times a day! So what’s a fantastic way to make a lasting impression? Offer them a promotional gift they’ll look at every day. But it doesn’t have to only be about business and promotion. Maybe you just want something fun and personal. If you don’t like having a standard phone case like everyone else, getting a custom print or design allows you to stand out from the crowd and show off your personality. People who identify themselves with their phone want something that truly represents their personality. Getting a personalized design on your phone case gives you that sense of identity.

Have you ever been out somewhere with friends, reached for your phone, and realized you grabbed the wrong one? This can happen all the time if you have the same or similar model as someone else. In fact, the likelihood of mistaking phones is higher than you might think. It’s simple to realize you picked up the wrong one, but when you do this often, such a mistake can get really frustrating. Thankfully, there’s a simple solution – create a personalized phone case. This ensures you know which phone is yours every time you put it down and go to pick it back up. Recognizing your unique case becomes almost instinctual, you’ll never have to worry about grabbing the wrong one again. Plus, making a one of a kind case is easier than you might think!

The ideal photo for a custom phone case should be high resolution (300dpi), at least 1000px x 1500px in size and have a file size under 3 MB. To find the resolution of your image, right click on the photo, click on ‘properties’ and look under ‘details’ to find the DPI. The dimensions can be found under properties too. So essentially, your photo needs to look as sharp as possible and the file cannot be too large or you may have trouble uploading it. If you’re unsure, you can always preview any image uploads for your phone case within the ‘Create your Case’ application.

Dongguan Jolly Industries Limited, founded in 2008, is an expert in the design and manufacturing of cell phone cases, offering all of our clients outstanding OEM and ODM services. The cell phone cases we design for them covering more than 300 models with frequent updates, such as for Apple, Samsung, Huawei, Sony, ASUS, LG, Zenfone, Nokia, Motorola, ZTE, Google, Alcatel and so on… These cases are then primarily exported to Japan, Europe and the United States. See even more info on d-jolly.com.

17 09 23

High quality magnetic track light wholesale manufacturer

Led downlight factory 2023: Magnetic track lighting system including power input cable, built-in driver, or external power supplies, L shape connector, and adapters(horizontal and vertical connector). You can download this PDF file to learn details about these accessories. How to Choose Magnetic Track Lighting? The best magnetic track lighting system should be easy to install, compatible with most light fixtures on the market, and should use the same accessories as other standard track lighting systems. There are including above many different parts for the whole magnetic track lighting system, so are you worried about not knowing how to choose these? Now share the following buying guide. Read additional details at led street light manufacturers.

Do Your Homework on Energy Savings: If you’re going to buy LED landscape lighting, then doing your homework on how much money you could save on energy is a must. While it’s true that all of the bulbs are more environmentally friendly, not all of them will save you as much money on your electric bill as others. One way to make sure that you end up saving money long term is to calculate how much electricity each fixture uses per hour and then compare this number with the current energy costs in your area. Some LED lighting options can actually use more electricity than incandescent and fluorescent lights!

Wattage is a measure of the energy consumption of a lamp, not the amount of light it emits. For led floodlights, generally 10W to 1000Watt optional. For small places, it is enough for 10W-50Watt, they are suitable for installation at a height of 3-5 meters. Then the higher wattage is better choices for higher place. The beam angle of the led flood lights are wide or narrow, and the range is between 3°～140°. Different application places have different requirements for the luminous angle. For some trees, landscapes or building outlines, it is more suitable to choose a narrow beam angle led floodlights, which can play a key part of the lighting effect, highlighting the characteristics of the illuminated object. However, for large spaces, then the wide distribution floodlights will be much better, such as 120° or 70*140°.

LED floodlights can also be called Outdoor LED spotlights, or LED projectors, which are large-area lighting fixtures used outdoors. It has made technical improvements and innovations on the basis of traditional metal halide floodlights and HPS floodlight fixtures. Use LED solid cold light source to replace traditional metal halide bulb and HPS bulb light source. LED flood light does not contain any toxic gas, will not pollute the environment, and it can be recycled. Competitive Price: Most of the led lights, especially led street light, led flood lights, led high bay, downlights, and track lighting is much more competitive in price than other suppliers.

All the magnetic linear track light systems can be with a smart solution. 0-10V dimmable / DALI dimmable; 2.4G WIFI, Bluetooth mesh, Zigbee smart magnet track lighting. Through a smart gateway(hub), they will be 3CCT color-changing and tunable in brightness by TUYA APP in a smartphone, and it is also available controlled by a remote controller, smart control panel, or smart speaker like Google Home, Amazon Alexa, etc. This smart magnetic track light is with Zigbee solution, remote control by TUYA APP on a smartphone, Google Home, Amazon Alexa speakers through the WIFI, and smart Zigbee Gateway(hub). It is tunable in color temperature (3CCT Color changing), and dimmable brightness. For the whole system, including low voltage DC48V smart magnetic linear lights, fold spotlights, magnetic grille spotlights, track spotlights, pendant lights, etc, available DIY light luminaires freely onto magnetic rail tracks. It is the perfect choice to do residential lighting for the kitchen, living room, and dining room.

Smart flood lights: It is including motion sensor, photocell, time control floodlight fixtures, most of them can be turned on/off automatically through some special setup. RGB led flood light: This is color changing or special color such as green, blue, red, yellow types for special application. Solar powered led flood lights: It is the most energy-saving type of floodlight, and it powers the floodlight by converting solar energy into electrical energy. Very suitable for use in countries or regions with sufficient sunlight, such as Africa, the Philippines, Indonesia, Brazil and other places.

What is the cost of one solar street light? The cost of a solar street light can vary greatly depending on the type of light, the size, and the features included. Generally, a basic solar street light can cost anywhere from $50 to $500. How long do solar street lights Last? Solar street lights typically last for 3-5 years, depending on the quality of the product and the environment in which it is used. I believe everyone has noticed that some LED streetlights ( cobra head led street lights or modular street lights )on the street emit yellow light, and some emit white light. In our impression, LED street lights in cities generally emit warm yellow light. Street lamps are emitting white light. Why is this so? In fact, the difference between yellow light and white light lies in the choice of the color temperature of LED street lamps, so what color temperature should be used for LED street lamps? Next, LED street lamp manufacturer GRNLED will briefly talk about this issue with you.

The magnetic grid spotlight is a directional lighting fixture with PMMA reflector and OSRAM chips with high CRI 90. Narrow beam angle 24°/36° optional. Suitable for use with magnetic line lights as basic lighting in the living room, dining room, corridor, etc. The magnetic linear lights also called magnetic linear floodlights, it is wide distribution 120° beam angle to be general lighting in large spaces like living rooms, offices, etc. Available 1ft/2ft/3ft/4ft in length. 3000K/4000K/6500K color temperature or 3CCT dimmable available.

Safety: Solar-powered street lights provide a safe and secure environment for pedestrians and drivers. What is the voltage of solar street light? The voltage of solar street lights can vary depending on the type of light and the size of the solar panel. Generally, the voltage of a solar street lamp is between 6V and 24V, the main one is a 3.2V system and a 12.8V system for solar-powered street lights with LiFoPo4 battery, and an 11.1V system for Li-battery.

GRNLED and GOLUMEN is a One-Stop led light supplier, factory, and manufacturer, providing most of the different types of led lights. Commercial lighting: Led downlight, LED Track light, led panel light, LED Linear lights. Industrial lighting: High Bay led lights, LED Tri-proof batten lights, Outdoor Lighting: LED Street Lights, LED Flood lights, Stadium lights. Landscape lighting: LED wall light, bulkhead light, Bollard lights, inground lights, underwater lights, pillar lights, etc. Solar LED Lights: Solar floodlights, solar street light. Smart Lighting: Zigbee smart downlight, smart Magnetic track light system.

5 09 23

Cylinder light factory today

Excellent led lights supplier: To guarantee optimal results, you should hire a professional landscaper or installer to do the job for you. They will not only plan the most effective placement for your lights but will also be able to recommend different fixtures that are ideal for each of your needs. As a homeowner, you should never just assume that you’ll be able to install LED landscape lighting on your own (nor should you attempt it!). Hiring a professional will help you get the most out of your outdoor lights and ensure that they work properly for many years to come. If You Can’t See Them, They’re Not Any Good. Find more information at magnetic track light.

Magnetic track lighting system including power input cable, built-in driver, or external power supplies, L shape connector, and adapters(horizontal and vertical connector). You can download this PDF file to learn details about these accessories. How to Choose Magnetic Track Lighting? The best magnetic track lighting system should be easy to install, compatible with most light fixtures on the market, and should use the same accessories as other standard track lighting systems. There are including above many different parts for the whole magnetic track lighting system, so are you worried about not knowing how to choose these? Now share the following buying guide.

Exterior landscape flood lights: This type of floodlight is mainly used for lighting effects of outdoor landscapes, such as illuminating trees and rockery at night. Their power is mostly less than 50W, and their light-emitting angle is mostly 30°. Mostly used in parks, squares and other places. Low voltage LED flood lights: The input voltage of this kind of floodlight is generally AC/DC12V 24V 36V 48V 60V. Compared with the high-voltage 110Volt or 220VAC input floodlight, the low voltage type will be safer, especially when it is installed outdoors, and easy to be touched by human being. Mostly used in special places such as ships, mines, petrochemicals, petrol stations, etc.

Durability: Make sure the lights are made of durable materials that can withstand the elements. Warranty: Make sure the lights come with a good warranty in case of any defects. a good solar street light manufacturer or supplier will provide 3years warranty at least. Which sensor is used in solar street light? A light-dependent resistor (LDR) is typically used in solar street lights to detect the presence of light. The LDR is used to detect the amount of light present and to turn the street light on or off accordingly.

Some of the most common applications of LED floodlights include the following: Stadium fields, such as football field, basketball court, tennis court and other sports spaces. Public places: parks, plaza, gardens, roadway lighting, high mast lighting. Landscape lighting for trees, Industrial lighting for Warehouse, workshop, and factory. Commercial lighting for train stations, subway, parking lots, etc. Horizontal light. Beam angle generally is 120-180° which will improve the efficiency of light utilization, reducing lighting pollution and waste. Technical Support: It is ok to support IES files to do Dialux simulation, providing installation, maintenance guidance, or technical training and lighting design solutions.

The magnetic track light is the latest lighting solution, there is a magnet on the track head of the lamp body, which can be adsorbed on the aluminum magnetic attraction rail track with an iron sheet, and can be removed, installed, and moved freely without tools. Generally, the whole system is consists of the magnetic track, magnetic led light luminaries, and accessories. It is available to do DIY track lighting system by above magnet lamps.

As a reliable High power Led floodlight manufacturer, supplier, and factory in China, we provide the best quality flood lamps with 50W/modular, 100W/modular, 200W/modular, and 250w/modular available. Their wattage includes 50W 100W 150W 200W 250W 300W 400W 500W 600W 1000W 1200W 1500W 2000W Max. They consist of an aluminum body and PC lens, the IP grade can be IP66. Using the Meanwell/DONE/MOSO/SOSEN/PHILIPS driver and Osram, CREE, Philips Chips, the guarantee is a 5years warranty, lumens output range from 120lm/W-160lm/W. Widely applied for outdoor environments such as high-mast lighting, tunnel lights, and stadium floodlights ( football field, tennis court lighting, basketball lighting, etc.).

What should I look for when buying solar street lights? Quality of the solar panel: Make sure the solar panel is of good quality and is able to generate enough power to charge the battery. Battery capacity: Make sure the battery has enough capacity to power the lights for the desired amount of time. you can check this blog: “What types of battery is the best for solar street lights?” to know more information about batteries. Lumens: Make sure the lights are bright enough to provide adequate illumination.

The flicker/flashing of led lights is mainly related to LED chips or LED driver (power supply), and LED floodlights is no exception. First, the quality of LED chips. Normal single 1W led chips withstand current: 280-300mA, voltage: 3.0-3.4V. If you use low-quality LED chips, it will not match the standard LED drive power parameters. Once the Led chips are subjected to excessive current, it will flash on and off. In severe cases, the gold wire or copper wire built in the chips will be burned, causing the chips to not light up. Find additional information at https://grnled.com/.

InNova News

InNova brings all the latest news to you

Category: Electronics