26 09 19

Applying dry ice to the dent is an effective way for fixing hail damage. The huge change in temperature can force the dents to pop out. Everything for you to do is just moving the dry ice around the damaged area to cool the area rapidly. But be careful as dry ice will damage your skin if you don’t wear gloves when handling it. Fixing hail damage by dry ice can be a cool solution, but sometimes it can not remove all of the dents. So in this case, you will need to do additional repairs.

The best paintless dent repair (PDR) in Colorado ? Dents near edges – If a dent of any size is situated near the very edge of a body panel or near a seam, PDR repair may be impossible. The reason for this is that in order to repair a dent using these techniques, you need to access the back side of the dent. The dent has a crease – If there is a sharp crease (like a folded page) in the dent, PDR likely will not work. Older vehicles – If your vehicle is older than 1990 or is a classic car, the odds are good that attempting paintless repair techniques on a dent will damage the paint. This is because the paint quality on older body panels can’t withstand the strain of the repair techniques.

In the first place let’s start with some car paint care advices: Clay: You could also obtain a better finish and a prominent shine if you use good quality clay. Before the clay is applied to the surface, make sure the car is cleaned with paint cleaner. Always remember to use the right applicator pad or a soft terry towel when working on the car’s exterior, to avoid scratching the vehicle. If you don’t know how to use detailing products or clay on your car, view online tutorials and easy do-it-yourself guides to complete the task easily.

So, we’ve explained what the procedure looks like — assuming it was done properly. And as you could probably guess there are a lot of ways an amateur or first-timer can get it wrong. It’s different than most other car repairs because it’s not about mechanical prowess; it’s more about control and the ability to maintain a steady hand and a gentle pace. You can’t rush it. The problem is, once a sheet metal repair starts to go awry, you’re usually much, much worse off than if you’d just left it alone. Metal holds its shape, but only to a certain point. Let’s say you get a dent in the hood — nothing too drastic, just a shallow, even dent with no sharp creases in an area that’s pretty easy to reach. You think it’ll be easy to pop it out on your own, so you begin to massage the underside while holding your shaping tool in place. You’ve made good progress so far, and a casual observer wouldn’t even notice the flawed area. But it’s not exactly perfect, and since it’s been fairly easy to this point, you decide to keep massaging the area to make it flawless. After a few more minutes of massaging, you realize that you’ve pushed it just a little too far. And now you’ve got this flabby area on the hood where you stretched out the metal. And there’s no easy way to shrink it back down. Keep going and it’ll stretch even more. Lesson learned. See more details at Automotive hail repair.

19 09 19

First and foremost, the dents must be identified and analyzed before making the repair. The PDR Technician will examine each dent, and how he or she will be able to reach behind the sheet metal. Once the Tech has an understanding of how the repair is done, he or she will choose an area to get started on. The Tech uses a suction-mounted LED to help see the intricacies of the dent, even in the day time. In order to better see the dent, technicians prefer to work in an area which is out of direct sunlight.

“How much does car hail damage cost to fix?” Costs vary by auto shop, location, supplements (necessary auto parts), and the extent of the damage. For small dents, you can expect to pay under $100 for dent removal service. Larger dents equal larger bills, as will damage to windows, bumpers, and mirrors.

Best dent repair kits ? Boost your car value. Dents are an eyesore that depreciates the vehicle’s value. You can solve this problem when you opt for the best car dent remover. If your lease is ending soon, getting the car into tip-top shape becomes even more of a priority. Environmentally friendly. Whenever you take your car to the shop for body work, technicians are likely to use power tools to sand the damaged area, add paint primer, and so forth. With the best paintless dent repair kit, you don’t have to deal with the chemicals and toxic mess created through this process. It’s cleaner and safer to get the job done without plugging anything into an AC outlet. Push-from-behind PDR is completed by using specialized tools, including rods, to push the dent from the back of the vehicle’s panel. The deeper and wider the dent, the more time and manual effort it’ll take to fix. The more tools and rods you’ll have at your disposal, the more flexibility you’ll have to fix the particular dent.

The PDR techniques are applied using three different procedures, depending on their suitability for each particular case: Using metal rods to exert the necessary pressure from the inside out to remove the dent. Utilising hot-melt adhesives that make it possible to work from the outside when the characteristics of the panel or its damage make the use of rods unadvisable or impossible. Applying controlled heat through magnetic induction, a technique developed to restore the original strength of the steel that has been weakened by hard impacts. Thus, the panel recovers its rigidity through controlled changes in the temperature of the affected spot. See extra details at Automotive hail repair.

19 09 19

Estimating the transporting truck size when moving in a new place can cut down the cost of relocating. Here are a few advices from our favorite Denver moving company. Remember you are not limited to colors, shapes or themes. But it can be fun to get food stickers for the kitchen, pet stickers for your pets things, flowers or frilly ones for the girls and trucks or sports for the boys. Keep in mind this is supposed to be a fun way to get the kids involved and keep them interested in their move. Have them place the stickers in the same area on each box in a visible area so that when moving day arrives it is easy for the movers to see. You will be amazed at how quickly this will help your move go if all boxes are clearly labeled and ready to go. If you have time you can have them create their labels out of construction or colored paper.

Once the moving date is confirmed, make a start on packing as soon as you can. Get together a plan of action with a room by room checklist of how you will pack along with all of the packing material you’ll need. See extra info at Moving company quotes Denver.

Keep drawers intact by covering them with Press’n Seal. Dresser drawers are like their own moving boxes – this will keep you from having to unpack and refold their contents.It’ll also make moving the actual dresser much more manageable. Many movers come with insurance, which means if something breaks, they have to compensate you. You might want to weigh the pros and cons though – they won’t want to be responsible for a television that isn’t properly packed in its original box and could end up charging you upward of $150 to pack it as they see fit. Also remember to book them weeks in advance – you’re not the only person trying to get out of your space on the last day of the month.

Moving house doesn’t have to be stressful. Here are some tips … If you’re moving locally this should be a no-brainer. Truck rentals used for local moves are billable at a per day and mileage rate, the daily price may vary by $10-$20 depending on the size. In other words, spend the extra few bucks and get the larger truck just to be sure. Larger rental trucks are best utilized for single family and townhomes. If you have any doubt about whether or not your household goods can fit into a medium truck size you should always defer to this range. Most small moving trucks have rear wheel wells that stick out and reduce the amount of flat cargo space.

As you begin packing boxes and storage containers, you may get a much better idea of how much space you need in a moving truck. After all, it can be challenging to estimate truck space you need for all your kitchen items stored in cabinets and drawers. After you pack non-essentials, you can determine how many additional boxes you need for the essentials that you will pack at the last minute. In addition to considering boxes, pay attention to how many furnishings or appliances you own and the dimensions of each. Remember to take advantage of vertical space in a truck. While using a truck rental company’s estimate when selecting the right size of truck or trailer to rent may be helpful, keep in mind that this is merely an estimate. Some people have much more substantial furnishings, more things, and tons of stuff crammed into every closet and cabinet. Other packrats even have entire garages jam-packed with items from floor to ceiling. A smart way to better estimate a suitable truck size is to attempt to cluster your things together, such as in an unused formal dining room, a garage or another large space. This effort also helps you prep for the move. When you pack a place full of items and measure the area, you will have a better idea about the right truck size for your needs. See more info on Local moving companies Denver.

If the rental agency doesn’t provide an estimate of what the trucks can hold in terms of equivalent spaces as in the list above, you can guess using this general guide: one room = 3 cubic feet of truck space. Again, this is just an estimate, and you should always err on the side of caution and rent a slightly larger truck than your estimate.

Decluttering your home is a massive job in itself, and this is a job only you can do. As such, why not take the strain off a little and get the removals to do what they are best at – and that’s to pack everything up for you. For me, its a no-brainer for so many reasons: They will be insured for any breakages. They can do this SO quickly! (it’s great to watch the experts in action!). It usually doesn’t cost a lot (a lot less than I imagined it would cost), and when you are talking about the cost of moving I think it’s an expense that’s well worth it. It frees you up to oversee everything. They supply all boxes and packaging which will save you time and expense

Your current home works for you – without really having to think about things anymore. You have the right flooring, furniture, window dressings etc. that fit your lifestyle. However, when you move you may have agreed to leave certain things in the house such as curtains, freezer etc… As such, it’s worth making a list of these things, remembering to leave them behind and not pack them (put a sticker on things that the removals company shouldn’t touch to be safe). You don’t want to end up moving only to find you have brought something with you that you shouldn’t have!

Often the fridge and freezer are built in now, so this is a tip only for those that you are moving to your new house. Switch them off the day before your move, defrost and unplug so that they can be moved easily and safely. Put anything you want to take food-wise into cool bags or an ice box for the move itself – and always allow the fridge/freezer to stand for a while in its new home before switching it back on. Source: https://strongmanmovingusa.com/.

3 09 19

“Should I file an insurance claim on vehicle hail damage?” This is dependent on your deductible. For minor damage, it’s usually best to pay out of pocket for repairs. Major hailstorms, on the other hand…. Review your insurance policy after receiving your hail damage repair quote to see if filing a claim is in your best interest. If possible, ask your chosen auto body shop for assistance with your insurance claim.

To begin working the underside of the sheet metal, the Tech uses long metal rods named PDR tools. These tools are used to reach into tiny gaps between panels and into other holes, and they prevent the need to remove panels and lining. However, for dents in difficult locations some disassembly may still be required. Using the PDR tools the Tech will slowly push the dent upwards repeatedly, stretching the metal back into its original position. Depending on the severity and location of the dent, this may take many pushing repetitions to flatten the dent.

Joe Dent full-service paint less dent repair Dallas, TX : Just like any skill, PDR takes a significant amount of time to master. NOCO always recommends you see a professional in order to be fully satisfied with a repair. However, it is possible to remove dents yourself at home, granted you have the correct tools. Properly removing dents involves getting the special metal rods and body picks to push out dents from the underside of the body panel. This is easier said than done, as you simply cannot place your hand behind the panel you need to work with. There are liners and multiple panels that will may need to be removed to get to the working surface. On top of this, PDR is very much a technique of “fine tuning,” meaning that it is easy to push too hard and make the dent worse and/or cracking the paint.

Best dent repair kits ? Cheaper than professional repair. Paintless dent repair (PDR) kits can substitute a trip to the repair shop and help keep more money in your wallet. There are kits for tiny, medium-sized, and large dents, and the average price of the kits is generally a fraction of what you’d pay for repairs. Easy and convenient. With the right dent puller, it’s very easy to set up in your driveway or parking lot. The best PDR tools are shipped with detailed, easy-to-follow instructions. You can rest easy knowing they will not damage your car’s paint. From the ease-of-use standpoint, the suction dent puller is the undisputed winner. The suction cup works with metal and plastic auto bodies. The cups are made of rubber and plastic. Depending on the size of the cup, it can lift upwards of 130 pounds. If you want one of the best suction dent pullers, consider whether the kit includes multiple suction cups.

Besides the obvious difference in achieved results, the PDR technique offers, in contrast with conventional repairs, a radical reduction in repair time. The arduous conventional process, which involved sanding, applying fillers, painting, drying, and polishing, usually meant at least five days in the repair shop, which could easily become weeks when the damages were significant. By using PDR procedures, a qualified technician can easily reduce the repair time to one fifth of the time needed for a conventional repair, and he can fix 1000 hail dents in less than 24 hours.

The company behind Super PDR is Shenzhen Zhi Zong Si Hai Technology Co., Ltd. Based in Shenzhen, China, the manufacturer bills itself as a leading brand of paintless dent repair tools and accessories. Among its most popular products is the Super PDR 41pcs Tool Kit. $100 and up: This higher price range is defined by better craftsmanship and materials used in the parts. You can expect to pay more for a set of removal rods made with stainless steel, which is corrosion-resistant.

In the event your fleet or lot is hit by a hail storm, our experienced team of estimators, management, and technicians are here to service you to the fullest extent. We are dedicated to helping our partners in every way. We have serviced jobs throughout the United States and welcome any questions you may have. Our goal is to save you money while servicing your fleet as efficiently and quickly as possible.

Have Hail Damage? No worries. Joe Dent LLC will work with your insurance company’s estimate, & repair and return your vehicle in 1/2 the time of a traditional body shop. Our customers are our most valuable asset, and we will always listen to your needs. We are committed to exceeding and surpassing your dent and hail repair expectations. Our goal is to deliver quality and professional paint less dent repair services that you deserve. All of our team members are trained to deal with all auto hail repair processes. From scheduling to maintaining an open line of communication between you and your insurance company. We promise to make this process as seamless as possible. With the help of our experienced hail repair technicians, we will manage all aspects of any hail or dent problem you may have. Read more details on Automotive hail repair Colorado.

2 09 19

Performance chip tricks? Chip replacements were the only way to change a cars mapping but now with standardised diagnostic ports it is much easier. In recent times we have seen cars equipped with on board diagnostic ports that allow a fresh map to be uploaded. Is chip tuning something you can easily do yourself? Not really, you need to have detailed knowledge of the engine and ideally a full set of diagnostic equipment on a rolling road to allow you to make “live” adjustments to the mapping. There is certainly a lot more to it than just changing a few numbers and getting a big power gain. With DIY chip tuning you also run the risk of a bad flash where the computer cannot be recovered and without a restoration image you will need to visit the main dealer or worse still buy a new computer.

Even though you have made modifications in your car, the ECU still continues to get an input of the old data which is stored in it’s memory. This old data no longer is credible as it pertains to conditions that existed before the modification. The input data to the ECU should pertain to the post modification situation of the components and parts introduced, while making the modification. This means that you have to erase the old data from memory and new data pertaining to post modification should be logged into the ECU memory by mapping in new readings. This is the reason why ECU resetting is essential for optimum performance after any modification has been carried out in your car. Read more details on centralina aggiutniva Drakebox.

OEM clutch – for VW 2.0TDi 103kW engine – is designed for 400Nm torque. VW Q02 six-speed gearbox is rated for max. 500Nm. Factory engine calibration data allow 320Nm @ 1800-2500rpm. Bad standard remap can easily go over 400Nm right from 1800rpm. What do you think happen to OEM dual-mass clutch? It reminds me few years ago…we replaced friend’s clutch after one bad ECU remap combined with bad driver mentioned earlier. All piston heads love motorsport…we all watched Walter Roehrl, Ari Vatanen, Stig Blomqvist, Juha Kankunnen, Colin McRae, Ayrton Senna or Schumi…did you also noticed they never used low revs, rarely used mid range revs and most of time spent in high revs where optimal power and torque is. One wonders why so many drivers try to push it hard in low revs and chiptuners support this stupidity. Power = Torque x RPM. More engine revs less torque you need. Why do you need 96HP@380Nm@1800rpm if you can have 170HP@3500rpm where is the optimal place to shift gears.

With chip tuning, we change the parameters of the engine control in order to achieve extra performance from the engine. We optimize the special maps, e.g. the boost map, the ignition map or the fuel map. What is of great importance here is that we leave the safety functions of the engine control switched on. With us, this component protection is fully functional – something you unfortunately cannot say of many “tuning boxes” or amateur tuners. When the component protection is deactivated, severe engine damage can be the consequence.

Chip tuning car includes adjustments that enhance the execution, the care of, and presentation of a vehicle. Tuning is an approach to customize a car and is a side interest for some. The territories of adjustment incorporate sound, inside, motor, suspension, and body. Every one of these ranges makes an interminable number of particular auto adjustments and can incorporate expanding efficiency, enhancing taking care of, or changing the outside.

Manufacturers generally sell one vehicle that covers various markets, with different tax and emissions regulations; different climates with extremes of heat, cold, humidity; different fuel quantities; different operating altitudes, etc. A manufacturer has to take all of these factors into consideration and make substantial compromises in the vehicles operation. Sales and marketing also have a big affect on the way an engine is mapped. If you look the in manufacturer brochure at the engine specs, the torque graph will rise, then flatten out on a straight line, and then drop off. This obviously isn’t how an engine breathes, and it’s the request of sales and marketing to produce this flat lining of the torque. Read extra info at boitier additionnel drakebox.

31 08 19

First let’s begin with some car paint care recommendations: Fixing Scratches: Apart from rust-proofing the vehicle, you should fix small scratches promptly. If the scratch is not too deep, you should only use touch up paint and finish off with a rubbing compound to get a good shine. If the scratch is deep and exposes the metal, you will have to sand off the surrounding paint and apply primer before painting the affected area.

Automotive hail repair ? Dents near edges – If a dent of any size is situated near the very edge of a body panel or near a seam, PDR repair may be impossible. The reason for this is that in order to repair a dent using these techniques, you need to access the back side of the dent. The dent has a crease – If there is a sharp crease (like a folded page) in the dent, PDR likely will not work. Older vehicles – If your vehicle is older than 1990 or is a classic car, the odds are good that attempting paintless repair techniques on a dent will damage the paint. This is because the paint quality on older body panels can’t withstand the strain of the repair techniques.

Another way to fix the small dents is parking your car in a sunny area. This is an effective way that most of car enthusiasts all know. By doing this way, the metal will heat up and expand. As the car surface expands, the shallow and light dents will pop out. The longer you park your car in a sunny area, the more likely this way will work.

A good paintless dent repair might look perfect, or close to it,but the metal underneath that shiny paint is still damaged. It’s thinned out and its structure has been weakened. But as long as the paint is still there and it’s not immediately obvious, that’s probably good enough. After all, it’s not a safety concern or anything. Just remember: Sometimes it really pays to hire a pro. To DIY or not to DIY? I’ve never tried to use an at-home paintless dent removal kit to bang one out myself; however, I have owned a car that I had completely repainted because paintless dent removal wasn’t an option. And it’s a pain in the butt. And it’s expensive. And I’ve also made some bad calls in terms of judging what I can handle myself … and what I’d just make worse. That said, I’ve never bought a product from an infomercial to attempt a car repair.

Instead, save yourself some of that hard-earned money and do it yourself. There are plenty of ways to get a small dent or ding out of a vehicle at home without ruining your paint, and you don’t need to be a gearhead to do it. However, not all of these tricks will work on your particular automobile; your mileage may vary depending on where the dent is and what your body panel, hood, or bumper is made of (aluminum, carbon fiber, plastic, fiberglass, steel, etc.). For instance, aluminum has little memory properties, so paintless dent removal is much more difficult.

We recommend going to a professional repair service to avoid a lot of extra costs. Meet EvidentPDR in Colorado. Ben Lincoln has been working on cars since childhood and found a passion for Dent Repair at an early age of 15. Not many find their calling in life so quickly, let alone in the dent repair industry. After identifying his passion, he harnessed his talents and became the 256th person to become VALE Master Craftsman certified in the world (there are only ~600 as of July 2018). During the last 12 years he has assembled a veteran team to share his vision: To deliver the best workmanship, relentlessly focusing on customer service, and going above and beyond expectations to make sure every customer is proud to do business with Evident PDR! Read extra info on Automotive hail repair Colorado.

Hailstorm damage is a car owner’s worst nightmare and can easily be avoided with a few cautionary steps: try to park your car in a shaded or covered area, especially during seasons when hailstorms are prevalent. If you’re going to be going out of town for an extended amount of time, make sure that your car is parked in an enclosed area and, if possible, have someone check on it once in a while. Open spaces will leave your car helpless against the wrath of this natural phenomenon.

When done correctly, your paint should feel so silky smooth it will force a smile across your face; truly like waxed glass! Traditional washing, polishing, and waxing will not remove these embedded pollutants. They need to be removed occasionally as they build-up on your cars paint. There are numerous products available to remove these pollutants. See Clay Bar for the simplified way to arm yourself with full understanding and choosing a quality Clay Bar Kit. The decontamination process will take place on a freshly washed car after all the superficial dirt has been washed away first.

22 06 19

Looking for VIN check reports including safety items? We have some advices for you and also some recommendations. Current statistics show that a large percentage of all cars on the road have a negative history. Mileage rollback is one of the most occurring types of fraud in the selling process of used cars. Consumers do, however, have options to detect mileage fraud. Therewith, they are able to protect themselves against used vehicle fraud and especially against mileage inconsistencies.

If you need to flog your current wheels, you’ve two options. You can either part-exchange the car at the dealership, where the dealer gives you a price and knocks it off the total cost of the car you’re buying. Or you can sell privately – where you list the car and get cash from the person who buys it. Part-exchange. This can save a lot of hassle, but it’s highly unlikely to be MoneySaving. Yes, it stops you having to advertise the car or deal with potential buyers, but, and this is a big but, you also won’t get as much as selling privately. Remember, the dealer will pay less than your car’s value so it can move it along at a profit. So weigh up offers carefully.

A vehicle identification number, or VIN, identifies your car. It’s made up of individual numbers and letters with special significance, and provides information about your vehicle. Each VIN is unique to the vehicle. You may want to decode the VIN for a number of reasons. You may need to find a proper-fitting part according to your vehicle build, find the place of manufacture for importation, or you may want to verify a car’s build if you are looking to buy it. Whether you need to find specific information or if you are just curious about your vehicle’s build, you can decode the VIN number for a wide array of information. See more info on Free VIN check.

If you are buying a car from an individual owner, make sure the seller properly transfers the title and registration to you. It’s important to close the deal correctly to avoid after-sale hassles. Before money changes hands, ask for the title (which is sometimes called the pink slip) and have the seller sign it over to you. Rules governing vehicle registration and licensing vary from state to state. If possible, check with your local department of motor vehicles to make sure there are no past-due registration fees you’d be responsible for should you buy the car. Whether you buy from a dealer or a private party, make sure you have insurance for the car before you drive it away. Once you’ve done the paperwork, it’s time to celebrate your new purchase – maybe with a drive-through dinner. You deserve it!

31 05 19

Quality auto hail repair : Just like any skill, PDR takes a significant amount of time to master. NOCO always recommends you see a professional in order to be fully satisfied with a repair. However, it is possible to remove dents yourself at home, granted you have the correct tools. Properly removing dents involves getting the special metal rods and body picks to push out dents from the underside of the body panel. This is easier said than done, as you simply cannot place your hand behind the panel you need to work with. There are liners and multiple panels that will may need to be removed to get to the working surface. On top of this, PDR is very much a technique of “fine tuning,” meaning that it is easy to push too hard and make the dent worse and/or cracking the paint.

As a result of the dents formation and the PDR process, the metal’s thickness is not consistent in the working area. By pushing the dent the metal will “mushroom” around the affected area, creating a faint ring. To correct this, the Tech will use a plastic “tap down tool” and rubber mallet to lightly tap the ring to be flush with the rest of the body.

Best dent repair kits ? Boost your car value. Dents are an eyesore that depreciates the vehicle’s value. You can solve this problem when you opt for the best car dent remover. If your lease is ending soon, getting the car into tip-top shape becomes even more of a priority. Environmentally friendly. Whenever you take your car to the shop for body work, technicians are likely to use power tools to sand the damaged area, add paint primer, and so forth. With the best paintless dent repair kit, you don’t have to deal with the chemicals and toxic mess created through this process. It’s cleaner and safer to get the job done without plugging anything into an AC outlet. The glue-pull PDR is a technique used on dents and dings. It involves using specialized glue to attach a tool or suction cup to the dented part of the surface and then pulling or twisting another tool to pull it out. When you’re looking for the best paintless dent repair tools, consider this method because most kits are sold all-in-one with everything you need to make your car’s exterior look new again. This method doesn’t damage your car paint, doesn’t require strenuous effort, and is environmentally-friendly.

Anyyion is a brand made by China-based manufacturer Shenzhen Chixun International Logistics, Ltd. It bills itself as a professional manufacturer and an honest seller. One of its most popular products is the AI 92-piece Kit. $100 and up: This higher price range is defined by better craftsmanship and materials used in the parts. You can expect to pay more for a set of removal rods made with stainless steel, which is corrosion-resistant.

For a long time, the dents made by hail on automobiles were fixed in only one way: using putties to fill the dents on the car body and repainting afterward each affected panel. But that technique presented serious problems: besides requiring an extended repair time, the action of the weather eventually hardened the fillers, cracking them. On the other hand, a vehicle that did not have its original paint suffered a considerable loss of value in the pre-owned car market because it was easy to detect that it had been repainted, it could hide more damages than those that met the eye.

Joe Dent has a centrally located repair center in the North Dallas area. During certain seasons, we offer pick up /delivery services, free mobile consultations, and free mobile estimates. We pride ourselves on convenience and customer service! From auto hail repairs to small door dings, there is no job too big or small.

Our customers are our most valuable asset, and we will always listen to your needs. We are committed to exceeding and surpassing your dent and hail repair expectations. Our goal is to deliver quality and professional paint less dent repair services that you deserve. All of our team members are trained to deal with all auto hail repair processes. From scheduling to maintaining an open line of communication between you and your insurance company. We promise to make this process as seamless as possible. With the help of our experienced hail repair technicians, we will manage all aspects of any hail or dent problem you may have. See more details on Automotive hail repair.

Joe Dent can fix your car in as little as one day and save you money too. Plus, the factory paint stays intact. You keep your original paint warranty and the rust and chip protection only the original paint can give.

27 05 19

Paintless dent repair in Macungie, PA ? If you are considering learning the skill of how to do paintless dent repair, it’s important to understand that it isn’t simply a matter of “popping” a dent out and expecting that the body will be perfect again. PDR involves a very slow and methodical process that requires special tools, a certain level of knowledge and skill, and a great deal of patience. Some dent repairs, even on small dents, can take up to two hours.

A good paintless dent repair might look perfect, or close to it,but the metal underneath that shiny paint is still damaged. It’s thinned out and its structure has been weakened. But as long as the paint is still there and it’s not immediately obvious, that’s probably good enough. After all, it’s not a safety concern or anything. Just remember: Sometimes it really pays to hire a pro. To DIY or not to DIY? I’ve never tried to use an at-home paintless dent removal kit to bang one out myself; however, I have owned a car that I had completely repainted because paintless dent removal wasn’t an option. And it’s a pain in the butt. And it’s expensive. And I’ve also made some bad calls in terms of judging what I can handle myself … and what I’d just make worse. That said, I’ve never bought a product from an infomercial to attempt a car repair.

Only three things in life are certain: death, taxes, and getting a dent in your car or truck. Even if you’re as careful as possible, you can’t always account for runaway shopping carts, wrongly thrown footballs, out-of-nowhere light posts, and other real-life annoyances. However you got your dent or ding, the next thing on your mind is, undoubtedly, how to get it out. Sure, you can take it to a body shop or friendly neighborhood mechanic for repair, but their price quotes can be unbelievable, especially if they want to remove the paint first or use body filler. $200 for that tiny dent?! I don’t think so.

If you can not expose your car to the sunlight, you can use a hair dryer instead. Just aim the hair dryer to the areas you want to fix, and wait until the dents even out. The ideal distance between the hair dryer and the car should be 2-4 inches. While using a hair dryer, there should be an interval of 2 minutes. If the car’s paint starts discoloring, you should stop applying heat right away. Use a rubbing compound or wax to revise the paint color.

This technique is popular among automotive enthusiasts when it comes to the removal of small dents. The idea is simple: heat will inevitably cause the metal surface to expand and (hopefully) pop the dent out. Remember that the more time the car spends time under the sun, the better this technique will work. Use a plastic and/or leather conditioner for the car’s interior, so as to not damage it while exposing the car to maximum sunlight. If the sun’s heat isn’t particularly strong that day, a simple hair dryer could be used in conjunction with the sun to concentrate the heat to a specific area. Point the hair dryer to the dented area for two-minute intervals until the dent pops out. Be careful not to touch the hot lip of the hair dryer on any painted surface. A two-to-four inch gap between the dryer and the surface is recommended.

We recommend going to a professional repair service to avoid a lot of extra costs. Meet EvidentPDR in Colorado. Leo has over 15 years of experience with print services, vinyl wrap, window tinting, graphic design, and physical advertising. After many years of working with Pinnacle Signs, he then founded LD Wraps for 5 years, where he acquired many large accounts in Colorado Springs, everything from designing for local breweries, news stations, and real estate. Ben and Leo met through several business interactions, where Ben asked Leo to design several vinyl decals, stickers, signs, and banners you see in our shop. See extra info at https://www.evidentpdr.com/.

3 04 19

Ford Mustang, a long series of legendary US cars. Mustangs began making big screen appearances in 1964 and have figured prominently in hundreds of notable films ever since. In 1964, the Bond film Goldfinger was the first movie to show off Ford’s new sporty car, a white 1964 convertible driven by a beautiful assassin. After a brief chase in the Swiss Alps, Sean Connery, in his Aston Martin DB5, shreds the Mustang’s tires and its rocker panel (borrowing a chariot racer trick from the epic film Ben Hur).

In the early ’90s, Ressler and a group of performance enthusiasts within the company came up with the idea to build an increased-performance Mustang out of Ford Motorsports performance parts (now known as Ford Racing Performance Parts). Based on the lessons learned from the SVO Mustang program, this group’s goal was to attract driving enthusiasts to the Ford brand.

There are a lot of good reasons to put a used Mustang at the top of your list of cars to consider purchasing. Whether you want a Mustang because you’re interested in a project car to share with your family or you just want something comfortable and fun to drive, there’s a pony out there for everyone. An iconic history: The Ford Mustang is a success story through and through. It’s the second-longest-running sports car nameplate in the U.S., after the Chevy Corvette.

The classic Ford Mustang remains a favorite among muscular car enthusiasts. It is a fun ride that promises to put a smile on your face. While there are several premium features available, even the base model is appealing. A top-notch safety rating helps push the Mustang further past the competition.

If you are looking to sell your mustang fast and get top dollar, we offer a variety of plans to suit your needs. From free classified listings to monthly ads, to long term ads. With Proven Results. We also have dealer options for Automobile Dealers that need to list more than one car at a time. Place your ad with us and be seen by THOUSANDS of Mustang Enthusiasts every day. We have a wide range of models listed for sale. Browse our listings for Cobras, GT’s, Fastbacks, Mach 1, Coupes, GTA, Shelby, Saleen, Boss, Ronaele, Eleanor, Grande, Convertibles, LX. Classic cars for sale from earlier days and today. Some made for a limited period of time. Your chance to own a piece of automotive history.Read extra info on Sell my Mustang.

MustangTraderOnline.com was started in 2003 and has been serving Mustang Owners and Lovers since that time. We offer a Classifieds Ads service to Mustang Buyers and Sellers that puts buyers and sellers together from across the country. Our classified ads range from free listings to premium listings to dealer listings.

More reasons to buy a Mustang : For nostalgia’s sake: The Ford Mustang is a time machine of sorts. It’s sure to conjure up many memories. Whether you drove one in high school, owned one in college, or own one now, most Mustang owners have many fond memories of their experiences with the car. From cross-country road trips to cruising the strip, the Ford Mustang has a way of taking us back in time.