Radar level transmitter supplier factory from China: The second case is that, in order to ensure the fluidity of crude oil, offshore oil platforms usually use hot medium oil heating pipes to heat the crude oil to ensure that it is stored within a certain temperature range. As the crude oil in the lower tank contains a small amount of water, some of the bottom water will precipitate out of the bilge water after standing, and the water vapor will evaporate during the continuous heating process. The water vapor condenses on the antenna at the top of the tank to form water droplets, causing a strong false signal at the top. Therefore, false signals are suppressed within 0~0.25m and the suppression line is set to 120dB to avoid false signals caused by water vapor condensation and level jumps at the top. In response to this situation, after on-site analysis and research tests decided to do a good job of pre-dewatering treatment, the water content of the crude oil in the lower tank is controlled at less than 0.5%, the heating temperature of the crude oil tank is controlled so that the crude oil in the tank is lower than 65 ℃, and the instrumentation is covered with thermal insulation materials on the outside, etc. Through the above measures, the phenomenon of level jumping caused by the formation of condensation at the antenna of the radar liquid level meter is eliminated. Discover even more info at radar type level transmitter.

Product features: The gas display is red and the liquid display is green, the luminous display is clear, the observation is large, and the visual distance is long. The liquid level sensor can be clearly displayed by red and green light column, which is suitable for application in dark places and more eye-catching at night. The body is made of stainless steel, the level meter display device does not contact the medium in the container, and there is no leakage. Suitable for first, second and third class containers, suitable for containers containing flammable, toxic and corrosive media.

What are the characteristics of radar water level meter? All measuring components are designed in an integrated manner, and there is no mechanical wear during measurement. Because the measurement is a non-contact measurement, it is not affected by the physical properties such as the density and concentration of the water body, it is not easy to be washed away by floods, has a long service life and is easy to maintain. The advantages of the radar level transmitter are obvious. The editor warmly reminds that to choose the right one, it is still necessary to meet your own situation.

Level Measurement Solutions for Deaerators: With proper level control and instrumentation, every part of the steam generation cycle can be managed for optimal efficiency. Deaerator Functions: The deaerator serves as an “open” type heat exchanger with its primary function being the removal of oxygen and other corrosive gases from the boiler feedwater. This is accomplished using steam, which can give up about 970 Btu per pound, to support the deaeration process as well as preheat boiler feedwater.

In the process of cement production, material level detection and material level alarm control play an important role from mining and crushing to storage and packing of finished cement. But because of the complex working conditions of cement plant, radar level meter has no small difficulty in measuring. Today, I would like to talk with you about specific difficulties and solutions. First cement plant material for measurement in the dust under the condition of particularly large, especially some pneumatic feed bin, involves the kinds of materials, material particle size is differ, dielectric constant is different also, such as broken limestone, raw meal, clinker, fly ash, coal, cement, the level of the bunker, it is very difficult to accurately measure Especially fly ash bin with low dielectric constant.

As one of the most professional magnetic level indicators manufacturers in China,Guangdong Kaidi Energy Technology Co., Ltd. provides customized solutions for a range of industrial automation process applications,such as mechanical float level indicator.We specialized in radar level gauge, fork type level switch,etc. These were implemented successfully, and KAIDI magnetic level gauge manufacturers products,such as radar level meter, magnetic level indicators, can be used in many different industries such as food & beverage, water, energy, pharmaceutical etc. Discover more details at https://www.kaidi86.com/. The Magnetic Level Gauge all use vacuum tube technology, with a lifespan of 3-5 years, and protection grade is up to IP68, not easy to fade.

Ground interference refers to one of the two output ends of the radar level gauge (or compensation line), and its AC voltage to the ground is called the ground interference voltage. This disturbance is also known as longitudinal, in-line mode or in-line state disturbance. Generally speaking, the interference voltage to ground can reach several volts or even more than 100 volts. The above is the interference of the radar level gauge we discussed. When we install or use the radar level gauge, we can also determine whether your use environment will cause these interferences to the level gauge according to the above situation. If these conditions exist, anti-interference measures must be taken to ensure that the level gauge can serve you better.

For the continuous measurement of corrosive, high viscosity, flammable and toxic liquids, liquid-liquid interface and solid-liquid interface that are difficult to measure by ordinary liquid level meter , ultrasonic level meter should be selected, but should not be used in occasions with large liquid level fluctuations . Ultrasonic level meter are suitable for measuring media that can fully reflect and transmit sound waves, but should not be used in vacuum. The ultrasonic flow meter should not be used in process equipment where internal obstacles affect the propagation of sound waves.

Unveiling the Benefits – The popularity of radar level measurement has significantly increased due to its range of advantages. Let’s explore these benefits, which have solidified radar’s position as the choice in industries- Accurate and Non-Contact Measurement- One of the key attractions of radar level measurement is its non-contact approach. Unlike methods that require interaction between sensors and materials radar sensors use electromagnetic waves to measure levels and capture reflected signals. This contactless method minimizes the sensor tear, leading to greater lifespans and reduced maintenance costs.

Power supply and output signal, the power supply has 220 V A C, 24 VDC, and the two-wire or four-wire system can be selected according to the needs. Output signal 4 ~ 20 mA DC or digital signal, select the appropriate model according to the needs. The above are all factors that need to be considered when selecting a radar level transmitter. The essence of the details is a serious attitude and a scientific spirit. I hope that every user can choose a suitable radar level meter.

Amorphous cores manufacturer right now: We are a group company located in Foshan, China, with two manufacturing plants, coving a production area more than 70,000 Sqare meters. We specialized in a broadrange of tape wound cores in Amorphous metal materials, Nanocrystalline alloys, Silicon electrical steels, and Mu metal Nickel alloys, for a wide variety of applications including solar inverters, new energy vehicles, instrument transformers, current sensors, commonmode chokes, custom power transformers. We also manufacture high-performance components using our high-quality cores made in-house. The use of nanocrystalline core offers significant benefits such as increased efficiency, reduced size and weight of components, and enhanced reliability in power electronic systems. Discover a lot more information at https://www.transmartcore.com/products-4713.

Nanocrystalline magnetic core is a new type of soft magnetic material with high BS, high effective permeability, high DC bias stability, high temperature stability, wide frequency adaptability, low power consumption and low cost. It is applied to high-power, high-frequency, miniaturized and high conversion switching power transformer and choke. At present, the solar energy industry inverter, water energy, air energy, electric energy conversion and charging of hybrid vehicles have great market space and future, because the performance of nanocrystalline magnetic core is highly controllable.

Amorphous nanocrystalline alloys are competing with soft ferrite in the field of medium and high frequency. In 10kHz to 50KHz electronic transformer, the working magnetic flux density of iron-based nanocrystalline alloy can reach 0.5T and the loss P0.05 5 / 20K ≤ 25W / kg, so it has obvious advantages in high-power electronic transformer. In 50 kHz to 100 kHz electronic transformer, the loss of iron-based nanocrystalline alloy is P0.05 2 / 100k is 30 ~ 75W / kg, Fe based amorphous alloy P0.05 2 / 100k is 30W / kg, which can replace some ferrite markets.

As one of Transmart Industrial’s multiple product series, mumetal cores series enjoy a relatively high recognition in the market. Transmart Industrial provides diversified choices for customers. The mu-metal cores are available in a wide range of types and styles, in good quality and in reasonable price.Transmart Industrial effectively improves after-sales service by carrying out strict management. This ensures that every customer can enjoy the right to be served.

This is because the sheet iron core can reduce another iron loss – “eddy current loss”. When the transformer works, there is alternating current in the coil, and the magnetic flux generated by it is of course alternating. This changing magnetic flux produces an induced current in the iron core. The induced current generated in the iron core flows in a ring in a plane perpendicular to the magnetic flux direction, so it is called eddy current. Eddy current losses also heat the core. In order to reduce the eddy current loss, the iron core of the transformer is stacked with silicon steel sheets insulated from each other, so that the eddy current passes through a small section in the narrow and long circuit, so as to increase the resistance on the eddy current path; At the same time, the silicon in silicon steel increases the resistivity of the material and reduces the eddy current. rolled silicon steel sheet is selected. It is cut into long pieces according to the size of the required iron core, and then overlapped into “day” shape or “mouth” shape. In principle, in order to reduce eddy current, the thinner the silicon steel sheet, the narrower the spliced strip, and the better the effect. This not only reduces the eddy current loss and temperature rise, but also saves the material of silicon steel sheet. But in fact, when making silicon steel sheet iron core. Not only from the above favorable factors, because making the iron core in that way will greatly increase the working hours and reduce the effective section of the iron core. Therefore, when making transformer iron core with silicon steel sheet, we should start from the specific situation, weigh the advantages and disadvantages and choose the best size. Find more details on https://www.transmartcore.com/.

As the iron core of the transformer, generally 0.35mm thick cold-rolled silicon steel sheet is selected. It is cut into long pieces according to the size of the required iron core, and then overlapped into “day” shape or “mouth” shape. In principle, in order to reduce eddy current, the thinner the silicon steel sheet, the narrower the spliced strip, and the better the effect. This not only reduces the eddy current loss and temperature rise, but also saves the material of silicon steel sheet. But in fact, when making silicon steel sheet iron core. Not only from the above favorable factors, because making the iron core in that way will greatly increase the working hours and reduce the effective section of the iron core. Therefore, when making transformer iron core with silicon steel sheet, we should start from the specific situation, weigh the advantages and disadvantages and choose the best size.

Best tips and tricks for success in any domain of activity by Saladin Minutello: Coaching in general, is results oriented, generative in nature and requires clients to practice being accountable for what occurs in their lives. It distinguishes a client from the interpretations she has about life in general, herself in particular and about the specific outcome she is wanting. Coaching empowers her to shift those interpretations, which no longer serve her. It also empowers her to practice new ways of being that align her with her desires in order to reach her highest potential. It is transformational in nature because it focuses on the states of being that generate actions, which either move the client closer to her desired outcomes or further away. Shifting how an individual is being, rather than what she is doing, will create transformation, because the way she is being is transferable to every other aspect of her life. The client transforms their perspective, shifting their paradigm to include more, which allows an expanded repertoire of possibilities to exist. Find extra info on Saladin Minutello Dallas, Texas.

Self education is very important if you want to achieve great business success! Before you launch your business make sure you have some money: make savings, borrow from family and friends or approach potential investors. Make a financial back-up plan. Learn how to make a budget for your business. Do not expect that once you start your business to receive financing from a bank, because generally they are reluctant to finance start-ups. Consider using a financing program for new businesses such as the START Program. You, as an entrepreneur, are the best marketing agent for your business, so everything you do and communicate must inspire professionalism. This means that everything from clothing and attitude to business cards and behavior must be impeccable and give potential customers and collaborators confidence.

Top tips and tricks to improve in any domain of activity from Saladin Minutello Florida: Explain your professional situation and solicit feedback. When interviewing potential business coaches, don’t be afraid to seek early feedback on your personal business issues. Ask the prospective coach how he or she has assisted others in the past with the issues or challenges that you face. Compare working styles. Like a therapist or personal trainer, each business coach has a specific style for conducting coaching sessions. Do they typically conduct their sessions in person, on the phone, or via e-mail? How long, and how much, do they charge per session? And perhaps most importantly, how will they deliver feedback to you? Make sure their coaching style suits your needs.

Just like the rest of your productive morning routine, self improvement is best when we make it as easy and convenient as possible. This is because the easier it is, the more likely you are to stick with it in the long term and actually build lasting results. One of the most convenient ways I integrate self improvement into my own day is by doing small exercises in the shower. Showers are the perfect time to do your productive morning routine because: You shower every day, which makes them a good reminder, You have the privacy you need They are both relaxing and uplifting. If you are feeling happy and positive about your desires, and you are constantly motivated in your thinking, then you are already applying the Law of Attraction and Manifestation. If you are experiencing or imagining what you desire now, you are obviously happy about it. If you are anxious, worried and unhappy, then at these moments you are using the Law of Attraction in the wrong way. Then you are attracting the things you don’t want in life.

Both online and traditional corporate training have their advantages and disadvantages, and complicated logistics are a big disadvantage of the latter, as organizing a number of corporate seminars and workshops can be a real headache. However, it is not always possible for companies to fully replace their traditional training programs with online ones, as they still need some of the benefits that traditional training has to offer, such as social interaction among employees. This is where blended learning for corporate training comes in: by using a blended approach you can reduce the number of live seminars and organize the rest via video conferences without worrying about locations not being convenient for all of your employees. This way, you can easily distribute your training material through your Learning Management System and, of course, contribute to the follow up of both your online and live seminars by offering additional information for further online discussion, or conducting surveys and polls to evaluate the effectiveness of your training. Last but not least, a blended approach is not only more convenient, but also much more eco-friendly; just imagine saving printing material for so many employees.

Four sided planer woodworking machines manufacturer 2024: High maintenance Expenses: Machines can also require regular maintenance which can add up costs. Not everyone can pay for the regular inspections and repairs. So be prepared to consider high maintenance costs. Woodworking machinery provides more benefits than our estimation. However, drawbacks should also be on your consideration. You may not afford some things such as regular inspections. So, don’t forget to consider these disadvantages as shortcomings to prevent extra costs. Find additional info at https://www.v-holdmachinery.com/4-Side-Moulder.

A beam saw cuts panels and sheet materials to the size required. It can deal with MDF, insulation, plastics and laminated boards. A clamping beam keeps the boards in place while the mobile saw carriage moves underneath the material. This type of saw has a computer control allowing you to automate as well as making multiple cuts. These machines can also be linked to computer software that optimises your yield. A beam saw is designed for repetitive, accurate cutting to size, making them the most cost-effective at precision panel cutting. Front loading beam saw – the user loads the materials into the front of the machine. Rear loading beam saw – the user places the materials on to an automatic lift table which will automatically be loaded into the back of the beam saw.

Up-acting machines typically apply hydraulic pressure from the centre of the lower beam which pushes the lower beam upwards into a fixed upper beam. Tonnage is applied to the centre of the lower beam in an upward fashion. The flex in the bend tends to be even from left to right. Hydraulics are used to push the lower beam up and gravity is used to return the lower beam down. A loss in power will result in the brake being in the open position. Since the lower beam does move during operation, feedback to the operator is given. Knowing the lower beam is moving can be a safety feature. Down-acting machines are preferred if staged bending is important. Staged bending is a valuable option that can significantly improve productivity while minimising setup time.

The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. Read additional information at https://www.v-holdmachinery.com/.

A mortise is a square slot cut in the direction of depth for the purpose of making a mortise and tenon joint in a wooden piece. The mortising woodworking machines are used for cutting mortise and tenon joints which are very laborious and time consuming operations. There are three types of mortisers, namely (1) hollow chisel mortiser (2) chain mortiser and (3) oscillating bit mortiser. The hollow chisel mortiser, the most commonly used woodworking machines, consists of a revolving spindle carrying an auger bit at the bottom end. The auger bit rotates at a high speed inside a hollow chisel of square section. When the chisel is forced into the wood, the bit bores a square hole by the sharp end of the chisel, the auger bit and chisel thus work together and perform boring of a square hole. The depth of the mortise is regulated by means of an adjustable depth stop. The spindle is rotated by an electric motor, and tool-feed is obtained by pressing foot-lever.

Presses come in various sizes and with various powers/pressures. The presses can be easily adapted to fit a businesses personal requirements. Automated press lines are designed in conjunction with all through-feed press options to be fully automatic or semi-automatic. They can start at the brushing stage where the material is cleaned, through to gluing, pressing then cutting. Modern presses fall into two categories: down-acting and up-acting. A down-acting machine has an upper beam that moves downwards to bring the tooling together. An up-acting machine has a lower beam that moves upwards to do the same. Each machine has its own strengths and limitations.

In practice, the workpiece is either clamped between two centers or on a face plate. Long jobs are held between the centers and turned with the help of gouge, skew chisel, parting tool, etc. Generally, the lathe is supplied together with a number of accessories for making it useful for a variety of jobs. The size of lathe woodworking machines, as in the engine lathe, is usually specified in terms of the so-called “swing” of the lathe and the maximum distance between centers.

M521GH High Speed Moukder has superior material delivery system. The highest feeding speed can up to 60m/min with automatic feeding system. Professional solution for planning large amount of wood material. This machine can largely reduce processing time of wood, it improve efficiency and help reduce labour cost. The side feeding mechanism which is installed in in-feed table can ensure the wood material to be fed continuously in high speed. Equipped with gear case for short material to achieve continuously feeding and smooth cutting.

Nanocrystalline cores factory supplier 2024: Nanocrystalline cores are advanced materials used in the construction of transformers and inductors. The nanocrystalline transformer core is made up of tiny crystalline grains, typically measuring just a few nanometers in size. The small grain structure allows for superior magnetic properties, including high permeability and low coercivity. This results in reduced core losses and improved efficiency, making nanocrystalline cores an ideal choice for high-frequency applications where minimizing energy loss is crucial. The excellent thermal stability of nanocrystalline magnetic core ensures consistent performance over a wide range of temperatures. Discover many more info at transformer core manufacturers.

Characteristics and application of nanocrystalline magnetic core: High permeability, nanocrystalline Fe73 5Cu1Nb3Si13. 5B9 alloy has high saturation magnetic induction. The material becomes brittle after heat treatment and is easy to be processed into alloy powder. Compared with the nanocrystalline magnetic core wound with strip, the magnetic permeability of the nanocrystalline magnetic core is still very low and the soft magnetic properties are unstable. At present, the urgent problems to be solved are as follows: 1. Effectively control the growth of nanocrystals during heat treatment; 2. Molding of magnetic particle core; 3 Effect of heat treatment specification on soft magnetic properties of magnetic particle core.

However, at the same BM, the loss of Fe based amorphous alloy is smaller than that of 0.23mm thick 3% silicon steel. It is generally believed that the reason for low loss is the thin thickness and high resistivity of iron-based amorphous alloy strip. This is only one aspect. The main reason is that the iron-based amorphous alloy is amorphous, the atomic arrangement is random, there is no magnetocrystalline anisotropy caused by atomic directional arrangement, and there is no grain boundary causing local deformation and composition offset. Therefore, the energy barrier hindering domain wall motion and magnetic moment rotation is very small, with unprecedented soft magnetism, so it has high permeability, low coercivity and low loss.

As one of Transmart Industrial’s multiple product series, mumetal cores series enjoy a relatively high recognition in the market. Transmart Industrial provides diversified choices for customers. The mu-metal cores are available in a wide range of types and styles, in good quality and in reasonable price.Transmart Industrial effectively improves after-sales service by carrying out strict management. This ensures that every customer can enjoy the right to be served.

The common mode inductor using nanocrystalline core material can well suppress the peak voltage, protect sensitive components, and reduce the motor shaft voltage. Because of the unique characteristics of nanocrystalline core, it has been well used in some high-power system industries. Electric energy meter, power meter, ammeter, electric measuring equipment and other instrument fields. Various power current transformers in power transmission and distribution monitoring system. Leakage protection, relay protection, servo motor protection, fire monitoring, etc Current and voltage data sampling, etc. Read additional details at https://www.transmartcore.com/.

Commonly used transformer cores are generally made of silicon steel sheets. Silicon steel is a kind of steel with silicon (silicon is also called silicon), and its silicon content is 0.8 ~ 4.8%. The reason why silicon steel is used as the iron core of transformer is that silicon steel itself is a magnetic material with strong magnetic conductivity. In the energized coil, it can produce large magnetic induction intensity, which can reduce the volume of transformer.

Radar level measurement wholesale manufacturer from China: The second case is that, in order to ensure the fluidity of crude oil, offshore oil platforms usually use hot medium oil heating pipes to heat the crude oil to ensure that it is stored within a certain temperature range. As the crude oil in the lower tank contains a small amount of water, some of the bottom water will precipitate out of the bilge water after standing, and the water vapor will evaporate during the continuous heating process. The water vapor condenses on the antenna at the top of the tank to form water droplets, causing a strong false signal at the top. Therefore, false signals are suppressed within 0~0.25m and the suppression line is set to 120dB to avoid false signals caused by water vapor condensation and level jumps at the top. In response to this situation, after on-site analysis and research tests decided to do a good job of pre-dewatering treatment, the water content of the crude oil in the lower tank is controlled at less than 0.5%, the heating temperature of the crude oil tank is controlled so that the crude oil in the tank is lower than 65 ℃, and the instrumentation is covered with thermal insulation materials on the outside, etc. Through the above measures, the phenomenon of level jumping caused by the formation of condensation at the antenna of the radar liquid level meter is eliminated. Read more information at radar level transmitter suppliers.

The whole process measurement is rain proof, corrosion proof, high temperature, high pressure, leakage proof, no blind area, eye-catching display, intuitive reading, and a wide measurement range, suitable for all kinds of towers, tanks, tanks, spherical vessels and boilers and other equipment continuous measurement of liquid level. Optional liquid level alarm switch, can realize the upper and lower limit of liquid level alarm and control.

Measuring principle of radar water level meter: The radar level gauge adopts the working mode of transmitting-reflecting-receiving. The electromagnetic wave emitted by the antenna is reflected by the surface of the measured object and then received by the antenna. After measuring the distance from the water surface to the radar antenna, the elevation of the water surface can be calculated according to the elevation of the radar antenna. The radar water level meter adopts pulse wave technology with low power consumption. It can be powered by two-wire 24 VDC, 485 interface output, or can be directly powered by 12 VDC, SDI-12 interface output, with high accuracy and wider application range.

The performance of any level technology relative to instrument induced errors, calibration nuances, and vulnerabilities to process dynamics can have an immediate and adverse impact on fuel consumption. Seamless response to changes in demand and reducing maintenance associated with the instrumentation or damage to hardware are residual benefits that have their own financial ramifications; these aspects should also be considered when implementing any technology. In addition to the “open” or deaerating feedwater heater, the more common shell and tube heat exchangers/condensers can be found in larger scale steam generation cycles where their costs are offset by gains in thermal efficiency. The effectiveness of a shell and tube heat exchanger in transferring energy is contingent, barring hardware anomalies, on accurate level control.

In the process of cement production, material level detection and material level alarm control play an important role from mining and crushing to storage and packing of finished cement. But because of the complex working conditions of cement plant, radar level meter has no small difficulty in measuring. Today, I would like to talk with you about specific difficulties and solutions. First cement plant material for measurement in the dust under the condition of particularly large, especially some pneumatic feed bin, involves the kinds of materials, material particle size is differ, dielectric constant is different also, such as broken limestone, raw meal, clinker, fly ash, coal, cement, the level of the bunker, it is very difficult to accurately measure Especially fly ash bin with low dielectric constant.

With emphasis placed on customer satisfaction, innovation, product development and overall business transformation, the company continued to innovate and expand with each passing year. KAIDI has successfully achieved global recognition, obtaining the leading position as Asia’s top process automation sensor manufacturer. In the past 5 years, the company has undergone tremendous growth and development – flourishing internationally and providing customers worldwide with the best customized solutions for process automation. Discover more information on https://www.kaidi86.com/. Suitable for chemical industry, petroleum industry, metallurgical industry, water conservancy and electronic industry, etc.

Humidity interference, when the humidity increases, it will cause the insulator resistance to decrease, the dielectric constant to increase, the skeleton to be fluffy, and the resistance to increase, resulting in an increase in leakage current and changes in capacitance and inductance. Also, it softens the colloid and reduces measurement accuracy. Chemical interference, chemical interference usually refers to some corrosive gases, such as acids and alkalis. The long-term action of these gases will not only damage the instrument and internal components, but also conduct electricity with the metal, affecting the normal operation of the radar level transmitter.

Under many operating conditions, ultrasonic level meter and radar level meter are commonly used. Some users are very entangled in the choice of these two level meter and do not know how to choose. Today, let’s talk about the principles and selection principles of these two types of level meter . Principle and selection principle of ultrasonic level meter. Working principle: The ultrasonic pulse probe emits a beam of ultrasonic pulses to the measured medium, and the sound wave is reflected by the liquid surface. The distance between the liquid levels is measured by measuring the time difference between the emission and reflection of the sound waves. Since the ultrasonic level gauge is not a liquid, it can be used to measure corrosive, non-volatile and non-foaming places.

Radar level measurement technology symbolizes precision and innovation in industrial level sensing. Its non-contact operation, resilience in challenging environments and ability to handle measurement scenarios have earned it a reputation. Furthermore, with the integration of IIoT capabilities and temperature compensation features radar sensors continue to evolve and make contributions to advancing processes. As automation and digitalization become more widespread across industries, radar level measurement continues to be a technology that ensures efficiency, safety and reliability in their operations. By relying on radar sensors as guardians, industries can confidently navigate the intricacies of level measurement with unwavering precision.

Measurement accuracy, the accuracy of ordinary radar is generally ±10mm, and the accuracy of precision radar is ±3mm. Selection according to the actual needs of production. Range, according to actual needs, choose the antenna size. Note that the actual range is reduced in complex environments. Antenna type and antenna size, the larger the antenna size, the larger the measured range and the stronger the anti-interference ability. The antenna types of radar level gauge are rod type, bell mouth type, paraboloid and so on.

The rise of a reputation management expert : Liana Zavo: Liana Zavo continued to soar high in her career when she became a member of the Forbes Business Council and Entrepreneur Magazine in 2020 and the Young Entrepreneur Council in 2021. The years spent building her brand as a thought leader and media mogul led to more opportunities that enabled her to continue her advocacy for empowering female entrepreneurs and teaching them how to be seen and heard. By the end of 2021, Liana Zavo published and released her book titled BEPIC: Be Seen & Be Heard, which is available on Amazon, Barnes & Noble, and Goodreads. Shortly after, she became the first female author with a one-word acronym to have her own NFT book. Her article published in Forbes about the underrepresentation of women in the NFT space caught the attention of BBC News in London and invited her for an interview. See more details on Liana Zavo.

Question: What advice can you give for business owners when it comes to PR? Liana: A PR’s responsibility is to build and manage brand reputation. It requires time to create the desired image for your brand. Don’t expect it to be an overnight success. Instead, delve into the process with your PR team to brainstorm ideas and concepts best for your business. The advantage of PR Agencies is that you don’t have to spend a massive amount promoting your products and services. Packages are tailored and curated based on your needs. A small business owner can start with the basic strategies first to establish personal brand visibility which leads to massive social proof and credibility, and that leads to profitability. This sets the foundation for more speaking engagements and press coverage. Don’t expect to measure PR in ROI. It doesn’t work like that, it’s not marketing or advertising.

Question: Would it be a good time to start a business in our current state?

Liana Zavo: The new normal proved to be a complicated situation for everyone. Businesses had to adjust and pivot according to the new rules and health protocols to keep everyone safe. I suggest studying the latest trends and keeping an eye on where the demand is. Always keep moving like a shark! Social media is an ideal place to start since brands have switched completely digital to boost their presence online. Despite the pressures of the pandemic, there are still plenty of options worth trying. Don’t limit your imagination and ideas.

Question: To wrap up this interview, what is the biggest takeaway that aspiring influencers can learn from the media mogul on Clubhouse?

Liana Zavo: Own your influence and never let failures define who you are. We all start from small, humble beginnings and push forward to evolve into what we desire to be. I started with a few followers on Clubhouse, but that didn’t discourage me. I kept going and visited different rooms, joined in conversations, and connected with many people. I shared my knowledge, and in return, gained wisdom from peers. I showed up consistently until people recognized me for my expertise in my niche. My influence grew and led me to where I am today because I decided to pour into others with my expertise and knowledge in PR, media and how to run a successful business.

Taking risks is an inevitable part of building and nurturing a career. No matter what road awaits, nobody can move forward if shadowed by reluctance and fear. Despite countless failures, Liana Zavo never let these roadblocks keep her from reaching her ambitions. The founder and CEO of ZavoMedia, a PR and Digital Marketing Agency based in NYC, she firmly stands by her mantra, “Success is the ability to Conquer failures time and again.” By aligning her personality with her purpose, Liana pivoted her career

From a celebrity stylist and designer to a rockstar publicist and business woman. Her expertise in public relations, entrepreneurship, and leadership led her to appear on Forbes, FOX News, Entrepreneur Magazine, Young Entrepreneur Council, etc. After gaining momentum in the PR industry, Liana expanded her reach using a new platform called Clubhouse. This audio-based app connects people with experts from various trades through ‘rooms’ where anyone can join, listen, and participate in the conversation. Although the app is still in its beta phase, Liana saw this as an opportunity to teach business owners and professionals about PR. Due to the increasing demand on Clubhouse, Liana created ZavoMedia.com PR Academy to teach small businesses, professionals, and entrepreneurs the proper PR strategies to boost their personal brand in the press, media and TV. In this interview, we’ll discover how Liana etched her name in the PR industry and find out her notes on leadership, power and creativity.

ZavoMediaPR Group is a public relations agency headquartered in New York City that serves professionals and CEOs to increase visibility and credibility through traditional and digital PR. At ZavoMedia PR Group we don’t just follow trends, we start them through inclusive messaging that uplifts the voices that often go unheard. The CEO and founder Liana Zavo excels in digital storytelling and personal brand development. As a PR expert, Zavo helps establish professionals, entrepreneurs, business owners, and CEOs as authorities in their niche. ZavoMediaPR helps achieve clients’ compelling press campaigns, brand and content strategies to create strong brand awareness.