Party wall problems? Here are several advices: You must tell your neighbours if you want to carry out any building work near or on your shared property boundary, or ‘party wall’, in England and Wales. Party walls stand on the land of 2 or more owners and either: form part of a building, don’t form part of a building, such as a garden wall (not wooden fences). Walls on one owner’s land used by other owners (2 or more) to separate their buildings are also party walls. Party structures: You can also have a ‘party structure’. This could be a floor or other structure that separates buildings or parts of buildings with different owners, eg flats. Party wall agreements are different from planning permission or building regulations approval.
Certain works which are likely to affect your neighbours are covered by the Party Wall etc. Act 1996. This legislation provides protection to all parties involved and is intended to enable the works to be undertaken. In the event of non-cooperation from your neighbour or disagreement, party wall surveyors agree how the works should be carried out, including necessary protection measures and rectification of any damage. The purpose of the act is to avoid litigation by dealing with potential problems up front.
Having done everything correctly yourself and your neighbour having done nothing you would think that you could appoint your surveyor as ‘Agreed’ and save yourself a few pounds but unfortunately the Act states that the adjoining owner has a right to their own surveyor unless they agree otherwise. Surveyor’s fees are also an issue that can cause friction. Under the Act it is the surveyors that decide who pays their fees although in all normal circumstances, that will be the party planning the work which is only fair as your neighbour was quite happy with the way things were. The exception will be if the actions of your neighbour cause unnecessary expense. An example would be if they called out the surveyors to inspect some damage that was shown to pre-date the works.
At Home Heroes we provide a professional service, we are very competitively priced and you can be sure you award will be handled by qualified and experienced Party Wall Surveyors. We are a small company with a dedicated and qualified team of building surveyors on Party Wall Matters. We can deal with all types of project no matter how complicated and are able to offer a service that is both efficient and meticulous. See more info at Party Wall Surveyor Whitstable.
A few advices on welding equipment, MIG and TIG welders, plasma cutters. Stick Welding — If you learned to weld years ago, you likely learned using an arc welder. Stick welding for many years has been the most popular method for most home-shop welding needs. This process uses an electric current flowing from a gap between the metal and the welding stick, also known as an arc-welding electrode. Stick welding is an effective method for welding most alloys or joints and can be used indoors and outdoors or in drafty areas. It’s also the most economical welding method and provides the ability to create an effective bond on rusty or dirty metals. However, this method is limited to metals no thinner than 18-gauge, requires frequent rod changing, emits significant spatter and requires that welds be cleaned upon completion. Stick welding is also more difficult to learn and use, particularly the ability to strike and maintain an arc. Arc welders are available in AC, DC or AC/DC, with AC being the most economical. It’s used for welding thicker metals of 1/16 inch or greater. These machines are a good choice for farmers, hobbyists and home maintenance chores.
Looking for TIG welders? Welding Supplies Direct & Associate company TWS Direct Ltd is an online distributor of a wide range of welding supplies, welding equipment and welding machines. We supply Plasma Cutters, MIG, TIG, ARC Welding Machines and support consumables to the UK, Ireland and Europe.
Eliminate Any Extra Welds from the Design: Look for ways to modify product designs to eliminate unnecessary welds. For example, one company that manufactured boxes originally had a design that called for welded lift handles on each side of the box. By simply changing the design of the box to cut out lifting slots, it eliminated the need for welding the handles – saving time and money. In another instance, rather than making a part with an open corner, the design was changed to accommodate a closed corner, which meant 1/3 less metal required to fill the corner. Look for Items That Can Be Welded Rather Than Cast: We’ve already discussed ways to eliminate welds to create efficiencies, but what about adding welds? In some cases, it may be more cost effective to weld metal pieces to a part rather than cast the entire component in a costly alloy or exotic metal. For example, a company that originally used a part cast in a high-nickel alloy found that 50 percent of the part could be composed of standard, structural steel which allowed a savings in material and thus a savings in total cost. Also, the company was further able to redesign the part so that it was more efficient.
Flat-Position Welding Increases Welding Speed : It’s common knowledge that welding in a horizontal position will be the easiest and fastest way to weld. A flat position is not as taxing to maintain and the welding puddle will stay in place. Take some time to evaluate each project before beginning in order to make sure the majority of welds can be completed in this position. If a job calls for vertical welding, see this article about vertical welding. Core Wire Feeder Increases TIG Welding Speed: For professional welders hoping to speed up TIG welding, a core wire feeder will add filler metal through an automated process. Watch this video on how it works. This enables welders to work with both hands and to maintain a constant flow of wire into the welding puddle. Ed Craig at the Frabricator writes about the wire feeder process first developed in Europe, saying it is “suitable for all-position welding on materials of any thickness, the process addresses traditional GTAW limitations and can enhance both manual and automated TIG weld quality and productivity.”
How to pick a welder tips: Stepped voltage or synergic: Synergic MIG’s have the edge when you’re welding stainless & aluminium as they are pre-programmed, easy to set up & portable. They also provide a better weld characteristic and so give cleaner weld bead with less/no spatter. Inverters: Considerably smaller and lighter and so ideal for site work. All inverters are stepless and so have infinite control. Also cheaper to run power wise. Budget: How much welding are you going to undertake? Gear your purchasing decision around the jobs you will be working on the most. Polarity changeover; A lot of welders at the light industrial end will to be able weld with gasless flux cored MIG wire. Is the switchover easy on the machine you’re considering. Availability of spares & after sales service: Ask where the machine is actually made. Even the more recognised brands largely outsource their production, which can lead to quality and after sales issues with lack of continuity of supply for spares.
Business Name: Welding Supplies Direct & Associate company TWS Direct Ltd
Website: https://www.migwelders.ie/
Address : TWS Direct Ltd. Unit 1 M54 Space Centre.
Halesfield 8. Telford. Shropshire. TF7 4QN
Phone : +44 (0) 1952 582 260
Email: sales@weldingsuppliesdirect.co.uk
Office Hours: Mon – Frid / 9:00Am – 17:30pm