Here are some advices on how to maintain your hot tub and also a recommandation if you live in Colorado. Replace your insulated doors with screened louvered doors, which permit the shell and water to cool more quickly and also vents the heat from the running motors. (We do not advise leaving the doors open or off. The inside of a spa is not a safe place for children or pets, and you don’t want insects and rodents to get in).

Your daily maintenance tasks are all about ensuring good water quality. In a hot tub that means checking two things: PH and sanitizer levels. This is easy stuff, and can generally be accomplished by dipping a single, color-coded test strip into the water to check that everything is as it should be. If you’re diligent about maintaining your tub, most days this won’t mean doing anything more than walking out to your tub, dipping the test stick in the water, and heading back inside. If your PH or sanitizer levels need adjusting, however, you’ll need take an extra few minutes to dump the proper additive into your water to get things back their proper levels. Doing so will prevent a host of problems, including scaling, mineral buildup, corrosion, skin irritation, and cloudy and stinky water.

Advices for buying a hot tub : Plan on inviting guests or relatives over? Make room for a larger tub with more seats. You won’t want to take turns in your new hot tub. Will you be using the hot tub alone or with just two people at a time? If space is limited, a 2-3 person spa will be perfect. With a little more room, an extra seat or two is nice for stretching out.

This spa care tip is so often forgotten. However, if the skimmer starts to suck air, it could possibly damage the pump. The water level should be in the middle of the skimmer intake or a little higher. You don’t want it too high, and you never want to overflow the spa, so keep a close eye on the water level while filling.

The spa filter can be under the skimmer basket accessed from inside the spa, or it can be a small tank that is opened up underneath the spa. You’ll need to locate it first in order to clean or replace the filter during your spa care routine. If underneath the spa, you may have a valve that can be shut to prevent water from rushing out when you open the filter. Loosening a large nut or just turning the filter body counter clockwise is the usual method to access the filter cartridge. Some water spillage is inevitable when opening it up, but if you are careful it can be very little. Read extra info at Hot tub repair company in Colorado.