High quality ethylene bis stearamide manufacturer and supplier? Products have passed the REACH, ROHS, PAHS, FDA testing, are widely used in PVC products, PVC stabilizer, color masterbatch, filler masterbatch, hot melt adhesive, modified asphalt, engineering plastics, powder coating, road marking paint, polymer modification and other fields, It has become an important raw material supplier to Vietnam, Malaysia, Indonesia, France, Japan, South Korea and other countries, and its brand influence spreads all over the world. Read extra information at ethylene bis stearamide suppliers.
Its performance is comparable to the US Honeywell AC wax. It can improve the production efficiency of plastic processing, reduce the production cost, has good compatibility with polyolefin resin, etc. Oxidized PE wax has good moisture resistance at normal temperature, strong chemical resistance, excellent electrical properties, and can improve the appearance of finished products. Oxidised polyethylene wax can replace the products of Mengdan wax, Sichuan wax, liquid paraffin, microcrystalline paraffin, natural paraffin and polyethylene wax, etc, and its performance is comparable to that of the Honeywell A-C wax.
Polypropylene wax is a chemical substance produced by cracking, cut by heating, and pulverized by hot air. Higher melting point, lower melt viscosity, good lubricity, good dispersibility, can improve the gloss of plastic products. Widely used in chemical fiber pellets, electrostatic copy toner carrier manufacturing, ink abrasion resistance agent; LLDPE, HDPE and other polyolefin resin improvers and energy-saving agents; also used in polypropylene injection molding, drawing release agent, etc. See additional info on https://www.sainuowax.com/.
Plastic additives can generally be divided into two categories. Namely: process additives and functional additives. The main function of the former is to help the smooth implementation of the processing process and improve the smoothness of process operation. Such additives include antioxidant, lubricant, coupling agent, release agent, etc; The latter can endow or improve the specific application performance of products. Representative additives include plasticizer, light stabilizer, UV absorber, antistatic agent, flame retardant, nucleating agent, antibacterial agent, etc.
Use of internal and external lubricants: The amount of lubricant added to a system should enable the material to obtain uniform plasticization and sufficient fluidity under normal operating conditions. If the adjusted amount of external lubricant still cannot meet the requirements of material processing, a small amount of internal lubricant can be considered. There are many factors affecting the external lubricant. When using high surface active fillers, such as ultrafine calcium carbonate and active calcium, the amount of external lubricant needs to be increased due to their absorption and adsorption to the lubricant. When using impact toughening modifier, the possibility of adhering to the metal surface is large due to the high melt viscosity, so it is often necessary to increase the amount of external lubricant.